New gauges installed... Don't work !!
Thread Starter
Registered User
Joined: Feb 2005
Posts: 66
Likes: 0
From: MINNESOTA
New gauges installed... Don't work !!
Oh no, what did I do wrong !!
I hooked everything up the way it said in the instructions, and I mounted both the BOOST gauge, and the PYRO gauge right where it said to throughout this web site, and I got nothin'.
I get about 300 degrees on the pyro gauge, and that's it. I get a big ZERO on my boost gauge.
What could be wrong ??
** I'm actually leaving out of town right now, and won't be back 'til Sunday. I'll read your responces when I get home, and I'll try to remedy the problem.
Thanks in advance !!
I hooked everything up the way it said in the instructions, and I mounted both the BOOST gauge, and the PYRO gauge right where it said to throughout this web site, and I got nothin'.
I get about 300 degrees on the pyro gauge, and that's it. I get a big ZERO on my boost gauge.
What could be wrong ??
** I'm actually leaving out of town right now, and won't be back 'til Sunday. I'll read your responces when I get home, and I'll try to remedy the problem.
Thanks in advance !!
Registered User
Joined: Jan 2002
Posts: 331
Likes: 0
From: BFE Oregon
Did you go for a test drive?
If you rev the truck in neutral you'll only see about 300* and no boost.
You need to drive around (put a load on the engine) to see more.
But if you have go back and check all the connections.
If you rev the truck in neutral you'll only see about 300* and no boost.
You need to drive around (put a load on the engine) to see more.
But if you have go back and check all the connections.
Thread
Thread Starter
Forum
Replies
Last Post
camshaw
2nd Gen. Dodge Ram - No Drivetrain
2
Aug 9, 2007 01:34 PM
coontz0473
3rd Gen High Performance and Accessories (5.9L Only)
17
Sep 22, 2006 03:52 PM
