Lift Pump Installed
Thread Starter
Registered User
Joined: May 2004
Posts: 287
Likes: 0
From: Terryville, Ct
Lift Pump Installed
Just finished the install on a new cummins lift pump.
Total install took about 45 minutes THANKS to the great advice from the CREW @ DTR
. Picked the pump up @ Cummins Metropower Inc. in Rocky Hill for 161.76. I also use a Holley Red Pusher Pump which gave the old pump a little easier life, but if was still given up the ghost. F.P. on new pump @ idle is 23, I haven't given her a run @ WOT yet maybe of the way to work tomorrow
. Is 23 a little to high 
As always Thanks
Total install took about 45 minutes THANKS to the great advice from the CREW @ DTR. Picked the pump up @ Cummins Metropower Inc. in Rocky Hill for 161.76. I also use a Holley Red Pusher Pump which gave the old pump a little easier life, but if was still given up the ghost. F.P. on new pump @ idle is 23, I haven't given her a run @ WOT yet maybe of the way to work tomorrow. Is 23 a little to high As always Thanks
Registered User
Joined: Oct 2003
Posts: 694
Likes: 0
From: Olds,Canada
23 is fine, lots of guys including me idle pressure is higher. Bosch dealers I have talked to haven't ever seen a Vp blow seals and they have customers running 35+ psi. Si you will be fine.
However there will be someone who chimes in with the maximum 20 psi quote.
J
However there will be someone who chimes in with the maximum 20 psi quote.
J
Thread
Thread Starter
Forum
Replies
Last Post
big red psd cc
3rd Gen High Performance and Accessories (5.9L Only)
10
Jun 6, 2005 11:52 PM