I installed a Nordskog FP gauge, and with the great service from Vulcan, I have the numbers:

Idle: 14-15. (Mostly 14)
WOT 13-14 (mostly 14) with Comp on any setting.
Cruising highway: 14.

Seriously, does it get any better than that?

I installed the Vulcan Relocation kit. Pics are in my gallery.
Mike

 

Excellent #'s
Nice looking install!

RJ

 

Does it get any better? Well, no. 14psi at all times is PERFECT.

 

Thanks Hohn.
I was being sarcastic.
Mike

 

Thanks RJ. I even have the cable ties trimmed now.
Mike

 

14 psi at idle and 14 psi at WOT??? Do you have a pusher or just the big fuel lines? Sounds almost too good to be true...

Mike, I would like to talk you about your NADP tranny....

 

Dr. Evil,
I relocated the stock lift pump to the rear by the tank. Pics are in my gallery. I also put on a 1/4 turn Ball valve before the pump. I recommend doing that with any fuel system upgrade or repair.
PM me about the trans.
Mike

 

The shut off valve is a great idea, wish I had thought of that when I upgraded my fuel system. Nice Install!

 

Nice job on the pics...

 

Thanks! I already used it once when I hooked up the FP gauge.
Mike