Well I finally figured out why my truck was running so bad. I decided to pull the laser cut dv's out and put the stock ones back in my truck just to see if they were causing all of my troubles. When i pulled them out and looked at them I noticed that 4 of them were actually laser cuts and 2 of them looked my stock DV's. I guess the company that I ordered them from messed up when they shipped them to me. I looked at both sets of dv's just to make sure that I was not the one that messed up when I put them in. I also checked the numbers on them and the 2 that did not look like laser cuts did not match the numbers of the stock dv's. With the stock dv's in it still did not run very good so I put the stock injectors back in. The truck now runs pretty smooth again. I still have a bit of a viration in the foot peddle though. I still have the #6 plate in, the HX40, and my 3k gov. springs.


Now I just have a few questions:

1. Do I need to bring my timing back from 17.5*.

2. I am going to be pushing to much air with the HX-40.

3. Could I have hurt anything with those dv's.

Thanks for any help and sorry for the long post.
Justin