hello all you 2nd genners, im originally a 1st gen owner, but im installing a 2nd gen motor into my truck and have some questions, sorry if this post is long. first question is how do i advance the timing on my p-pump, i have a 95 12v engine with laser cut dv's, 4k rpm kit, marine head gasket and an ARP stud kit. i also plan to upgrade the turbo with a 60mm compressor housing and a 14 non wastegated or 16cm turbine housing(haven't decided yet) also 435 injectors and a #10 plate. so with all that what should i advance my timing too and how do i advance it. the engine is currently out of the truck, since im installing all this stuff. thanks for the help

jason

 

ahh come on guys, help a fellow diesel junkie, i know that some one has some knowledge to share
jason

 

I've seen it done and I know you need a timing wrench =\ To the top