Performance and Accessories 2nd gen only Talk about Dodge/Cummins aftermarket products for second generation trucks here. Can include high-performance mods, or general accessories.

Edge EZ

Thread Tools
 
Search this Thread
 
Old 01-31-2010, 10:06 PM
  #16  
Registered User
Thread Starter
 
diggerfan99's Avatar
 
Join Date: Jun 2009
Posts: 120
Likes: 0
Received 0 Likes on 0 Posts
So I can buy the Juice with Attitude and just not tap the pump? Does tapping the pump shorten its already short lifespan?
Old 02-01-2010, 07:27 AM
  #17  
Registered User
 
nickg's Avatar
 
Join Date: Apr 2007
Location: Edmonton Alberta
Posts: 2,435
Likes: 0
Received 0 Likes on 0 Posts
yes you can instal an Edge J/A and not hook up the wire that spices directly into the VP. Every feature will work on the J/A, except your limited to 60hp. Hard to say if the failure of a VP is caused by tapping it or lack of Fuel pressure, I'm guessing that a older hard used VP might fail should you tap it, lack of fuel pressure seems to be the general belief, of VP failure. mine was Tapped last Nov and I have logged over 2000hrs on it (approx 60,000kms) myVP was replaced in May08, and was only 8months old when I tapped it...BUT it had 1600hrs on it, 1600hrs for me is a lot of use doing the math it would be equal to 100,000miles. I have no regrets tapping my pump.

Just for the gauges/adjustability and small boost in power, the J/A is light yrs ahead of EZ and gauges
Old 02-01-2010, 05:58 PM
  #18  
Registered User
Thread Starter
 
diggerfan99's Avatar
 
Join Date: Jun 2009
Posts: 120
Likes: 0
Received 0 Likes on 0 Posts
Cool, I have a Fass 95gph so I don't think the Vp will starve for fuel. I also replaced mine in May of 08' I think I have about 40,000 on the replacement. Just don't want to buy anymore VP than I have to, those things are expensive. Sounds like J/A will be the choice.
Old 02-02-2010, 07:53 PM
  #19  
Registered User
 
2500superram's Avatar
 
Join Date: Jul 2007
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts
don't mean to high-jack this thread,but how do you adjust an edge ez.mine doesn't have any dial's or button's that i know of.
Old 02-04-2010, 08:02 AM
  #20  
Registered User
 
nickg's Avatar
 
Join Date: Apr 2007
Location: Edmonton Alberta
Posts: 2,435
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by 2500superram
don't mean to high-jack this thread,but how do you adjust an edge ez.mine doesn't have any dial's or button's that i know of.
On older ones (a yr ago) you remove the rear cover and there was a jumper plug, that you shifted, it was only for smoke control and not a huge difference, (10hp maybe from highest to lowest) it came from the factory in the highest setting, but when I opened up mine there was NO jumper, I got one from a computer shop.

The other day I read on edges site that the new EZ had settings of 20,40, 60hp. picture looked like the old ones

to know for sure call edge, I'm sure they will set you on the right path
Old 02-05-2010, 07:57 PM
  #21  
Registered User
 
2500superram's Avatar
 
Join Date: Jul 2007
Posts: 194
Likes: 0
Received 0 Likes on 0 Posts
thanks nick,i'll take a look at it .
Old 02-05-2010, 08:49 PM
  #22  
Registered User
 
Big Deezul's Avatar
 
Join Date: May 2005
Location: PA
Posts: 1,010
Likes: 0
Received 0 Likes on 0 Posts
when I had my 24v the first set up I ran was an ez with rv275 injectors, intake and exhaust. It was a great towing set up and got great mileage...its also a fairly cheap set up. I had gauges to keep everything in check, but even with a 12k lb trailer egt's were never an issue.

I did run a goerend valve body and single converter
Old 02-06-2010, 11:12 AM
  #23  
Registered User
 
novahauler's Avatar
 
Join Date: Apr 2008
Location: Virginia
Posts: 83
Likes: 0
Received 0 Likes on 0 Posts
I used to have an EZ, great box. Went to the Juice with attitude for the gauges and really like the adjustability of it. I got a factory reconditioned unit off ebay for like $600.
Old 02-06-2010, 11:17 AM
  #24  
Registered User
 
cowboyjay's Avatar
 
Join Date: Oct 2009
Location: Rural Utah
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
I have the ez and I have been really happy with it, I don't pull extremely heavy loads, just 3 horse trailer, it gives me the extra power I wanted and seems to do okay with fuel economy. I would get a more aggressive chip, but I'm still on my original autotrans at 107k, so I'm afraid to do much more! had no problems with the trans yet and don't want any, but I guess it depends on how much money you wanna spend!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jwhip
3rd Gen Engine and Drivetrain -> 2003-2007
28
05-29-2005 11:32 AM
rockjeep73
Performance and Accessories 2nd gen only
7
03-25-2005 03:34 AM
Hoss
3rd Gen High Performance and Accessories (5.9L Only)
13
06-18-2004 06:14 PM
powerwagon440
Performance and Accessories 2nd gen only
3
01-20-2003 08:50 PM



Quick Reply: Edge EZ



All times are GMT -5. The time now is 02:29 PM.