This is my second CTD but the first one I have tried to mod. I got a gauge pod, boost, trans temp, and pyro guages along with the Edge Comp. I spent a little while this afternoon searching for the port to plug the boost guage into that is on the side of the manifold. Finally found it. Now I am looking for the data port that is supposedly located behind the fuel filter mount. Im not seeing anything that isnt attached to something back there. In a picture in the instructions off the Edge website there is a bundle of wires there that I am not seeing in my engine compartment. Maybe I am just not looking hard enough! Its a 2002 2500 4x4 Auto Tranny if that helps. Are there any board members in the Nashville area? I live in Madison but I am willing to take a drive for some first hand knowledge! Any help would be appreciated! BTW I did a search before posting....one search per 60 seconds made it rought but I did search first! Thanks in advance!

 

Hello
I am too far to help physically, but on my '02 the data link connector was actually tucked away between the fuel filter housing and the power steering pump. It was all by itself with a cover on it. Took some searching to find it. Hope this helps.
mishkaya

 

I have the BD Comp on mine and used the Edge Comp instructions to hook up the pump wire. I'd be glad to meet you at Tractor Supply on Dickerson Rd. tomorrow(Monday) afternoon.

 

That sounds cool....Im gonna give it another crack in the morning. I will PM you my cell # and it would be cool if you could give me a shout and lemme know what time you want to meet up. If I get it on in the morning then great....if not then your assistance would greatly be appreciated!