i have a 99 qc,sd 4x4 truck with serious steering wander. all the parts in my front end are new, i want to get the dss steering crossmember but i dont know if it will work with my fisher minuit mount plow. anyone have this setup. thanks

 

No I don't have that set-up.
Just wanted to tell you, if still have steering issues, it will be the alignment.
Plenty of caster is needed, like 5-8 degrees. Have the camber set too. then toe-in.

 

yea im just going to rebuild the box, i figure the crossmember is just a bandaid for the problem.but it might make it last longer

 

It shouldn't interfere. I don't know if you've seen pictures, but the DSS mounts to your anit sway bar mounts on the frame. It shouldn't interfere.

 

yea but my plows rear mount bolts under the sway bar bushings right where the stabeliser would go