'93 W250 & 300HP???
Thread Starter
Chapter President
Joined: Sep 2005
Posts: 1,562
Likes: 0
From: Tupelo, MS
'93 W250 & 300HP???
I know of a guy who is selling a 1st gen CDT. It's a '93 W250 Reg. cab 4wd with a manual tranny. I know these were rated at 175hp/400tq. So I'm wanting to know what tranny it should have and what mods do I have to make to get a reliable 300hp to the wheels.
Registered User
Joined: Jul 2004
Posts: 246
Likes: 0
From: Dinwiddie, VA
Turn up fuel via pump. Exhaust/intake/hx35 turbo with 16cm housing/PODS and a clutch to hold it 
Originally Posted by streetsmoker
I know of a guy who is selling a 1st gen CDT. It's a '93 W250 Reg. cab 4wd with a manual tranny. I know these were rated at 175hp/400tq. So I'm wanting to know what tranny it should have and what mods do I have to make to get a reliable 300hp to the wheels.
Thread Starter
Chapter President
Joined: Sep 2005
Posts: 1,562
Likes: 0
From: Tupelo, MS
Reliable all around performance, with a little of everything except racing/sled pulling. Would a Dual Friction from Centerforce hold up? I know I allready have an '03, but there is something about a 1st Gen Reg. cab 4wd. The price is right too, he's wanting $6500 w/143,000mi. and it's in great shape.
Registered User
Joined: Apr 2005
Posts: 3,253
Likes: 0
From: Terre Haute,IN
$6500 sounds about the going rate, nothing special. The stock clutch will hold 750rwft-lbs. Which is about 350rwhp. The engine is rated 160hp and 400ftlb from factory. Air and fuel is all that is needed for what you want lol...
Thread
Thread Starter
Forum
Replies
Last Post
streetsmoker
1st Gen. Ram - All Topics
19
May 25, 2006 08:23 PM
pmtg
Performance and Accessories 2nd gen only
5
Feb 18, 2004 01:08 PM