Alberta Dyno and GTG
Registered User
Joined: Jul 2003
Posts: 2,069
Likes: 0
From: Lloydminster, Alberta, Canada
Just show up. I believe Kevin (Morkable) was playing event facilitator and just keeping a tally for grumblies and such, or even if there would be enough folks to have this thing as a go.
Come on down!!!!
On edit: It is a go btw!
Come on down!!!!
On edit: It is a go btw!
Registered User
Joined: Jul 2003
Posts: 2,069
Likes: 0
From: Lloydminster, Alberta, Canada
OK folks, so you don't have to look back through the pages, here's the destructions again:
Time: Feb. 17, 2007 @ 0900 hrs.
Name: Sub Racing
Address: 11442 Winterburn Rd. (215st)
Phone: (780)628-4438
Contact: Mark
Located: West side of Winterburn Rd. (215 St.) in the Yellowhead West Industrial Park. It is the Southern most shop (next to EXH Engineering) in the little strip mall. Front parking lot was busy when I visited - maybe not so much on the weekend - lots of room out back.
Directions:
If comming from South of / southern Edmonton: Take Anthony Henday Drive (Sec. Hwy. 216) to Stony Plain Rd. (Hwy. 16A), turn left and head West (not far!), get in right lane, exit at Winterburn Rd (215 St.) sign (service road), exit right again, turn right onto 215 St. and head North to 115 Ave., turn left, then left into strip mall.
From West of Edmonton on Hwy. 16 (Yellowhead Trail) (eg. Hwy. 43): Exit right off Yellowhead Trail (Hwy. 16) onto Winterburn Rd. (215 St.), and head South to 115 Ave. (~300 yards), turn right onto 115 Ave., left into strip mall.
From East of / northeastern / or directly North of Edmonton: Take Yellowhead Trail westbound, exit right off the trail, turn left onto Winterburn Rd. (215 St.), head South to 115 Ave. (~375 yards), turn right onto 115 Ave., left into strip mall.
Time: Feb. 17, 2007 @ 0900 hrs.
Name: Sub Racing
Address: 11442 Winterburn Rd. (215st)
Phone: (780)628-4438
Contact: Mark
Located: West side of Winterburn Rd. (215 St.) in the Yellowhead West Industrial Park. It is the Southern most shop (next to EXH Engineering) in the little strip mall. Front parking lot was busy when I visited - maybe not so much on the weekend - lots of room out back.
Directions:
If comming from South of / southern Edmonton: Take Anthony Henday Drive (Sec. Hwy. 216) to Stony Plain Rd. (Hwy. 16A), turn left and head West (not far!), get in right lane, exit at Winterburn Rd (215 St.) sign (service road), exit right again, turn right onto 215 St. and head North to 115 Ave., turn left, then left into strip mall.
From West of Edmonton on Hwy. 16 (Yellowhead Trail) (eg. Hwy. 43): Exit right off Yellowhead Trail (Hwy. 16) onto Winterburn Rd. (215 St.), and head South to 115 Ave. (~300 yards), turn right onto 115 Ave., left into strip mall.
From East of / northeastern / or directly North of Edmonton: Take Yellowhead Trail westbound, exit right off the trail, turn left onto Winterburn Rd. (215 St.), head South to 115 Ave. (~375 yards), turn right onto 115 Ave., left into strip mall.
dodgediesel,
Here's all the information!
Registered User
Joined: Jul 2003
Posts: 2,069
Likes: 0
From: Lloydminster, Alberta, Canada
See y'all in the morning.
Registered User
Joined: Aug 2005
Posts: 7,780
Likes: 0
From: Airdrie, Alberta
Yes he did give a good run, but the operator only had to hold his foot to the floorpan and give'r . Excuses, excuses eh....LOL... really I was impressed with how well Daves rig ran, smooth power and nice curve. If he has bigger squirters, I think his EGT gauge will be more like mine. One second 800, the next 1500.
Are you gonna be able to make it? I owe you a coffee . . .
Chapter President
Joined: Feb 2002
Posts: 6,102
Likes: 2
From: Red Deer, Alberta Canada
I'm workin on it. Getting there anyway. The 64 is a little big for my plans. I have used a great turbo selection guide on the NWBombers site that really spells out the type of turbo you really need, instead of the biggest/baddest.
Registered User
Joined: Mar 2006
Posts: 689
Likes: 0
From: Kelliher, Saskatchwan, Canada
hey kevin, so did the intercooler make a difference for your truck, i wish i could come but im working in red deer and then camrose tommorow night. sorry i will make the next one for sure.
Registered User
Joined: Jan 2004
Posts: 1,075
Likes: 0
