Yep, its called a Smarty. Or the hot version of the juice as well.

 

Yeah try the smarty, that will fix you right up on that baby

Kevin

 

So, how many is that now Kevin?


Btw, man is it nice to work with a good crew.....add getting off early today. One of the best Mondays to date.

 

Im not sure anymore, there has been so many additions and deletions, I am a little confused. But I think about 12 15 trucks on the rollers, and 10 or more as spectators

Kevin

 

Thats less than I figured that want to run on the dyno, so if there are not too many I will run for sure. I wouldnt mind adding some numbers to my sig so long as they are a bit higher than stock. By the way, Im running mud terrain tires, will I need some extra weight to keep from breaking loose or is that just wishfull thinking? I guess I need to update my signature because the full fuel screw is all the way in and a bit of torque applied to it, plus a bit more timing has helped some.

 

Last event we had, they ratcheted the trucks down pretty good, I don't think any weight would've made much difference. Your tires would probably be ok, we had one running a set of Iroks, and they held up. The other chevy's though, lots of little bits of rubber laying around after his runs.

 

Thanks, Ive never run on a dyno so this is all new to me. I dont think my old heap will make enough power to tear up any rubber but it would be interesting to find out how much my modifications have done for me.

 

Looks like I'm going to have to pass on this event.

The weather has not been in my favor to change out the intercooler and such. Weather hasn't helped things at work either so it looks like I'm having to work the weekend anyways.

I'll have it all together for the next one for sure. I need some new numbers to see where my latest mods have put me.

Sorry guys, I tried!!

Jeff

 

Thats too bad Jeff, hope to catch you at the next one. BTW I found out today that the dyno is a Mustang, so that is good for us diesel guys.

Kevin

 

Well it looks like ma and I will be making the trip to Edmonton dont think Ill put the truck on the rollers just to far from home to pop the headgasket need orings. Hope to see you all there.

 

I've been keeping an eye on this thread hoping to be able to come out, but the weekend is a bad one for me.....next time hopefully......

Jason

 

I hope you can make it Jason, I think it will be a good one.

On a side note, I will be in Edmonton for sure Friday, I am going to stop by both sub performance and NADP. Not sure what NADP is going to do for us yet, but Barry said again on monday that he is coming down for sure. Also if anyone wants to get together for a drink or 2 on friday night let me know.

Kevin

 

Yup! I'm in. Gonna work on my wiring project during the day.........doubt I'll get it all done, but who knows. I'll PM my cell number.

 

OK folks, so you don't have to look back through the pages, here's the destructions again:



Time: Feb. 17, 2007 @ 0900 hrs.
Name: Sub Racing
Address: 11442 Winterburn Rd. (215st)
Phone: (780)628-4438
Contact: Mark
Located: West side of Winterburn Rd. (215 St.) in the Yellowhead West Industrial Park. It is the Southern most shop (next to EXH Engineering) in the little strip mall. Front parking lot was busy when I visited - maybe not so much on the weekend - lots of room out back.

Directions:

If comming from South of / southern Edmonton: Take Anthony Henday Drive (Sec. Hwy. 216) to Stony Plain Rd. (Hwy. 16A), turn left and head West (not far!), get in right lane, exit at Winterburn Rd (215 St.) sign (service road), exit right again, turn right onto 215 St. and head North to 115 Ave., turn left, then left into strip mall.

From West of Edmonton on Hwy. 16 (Yellowhead Trail) (eg. Hwy. 43): Exit right off Yellowhead Trail (Hwy. 16) onto Winterburn Rd. (215 St.), and head South to 115 Ave. (~300 yards), turn right onto 115 Ave., left into strip mall.

From East of / northeastern / or directly North of Edmonton: Take Yellowhead Trail westbound, exit right off the trail, turn left onto Winterburn Rd. (215 St.), head South to 115 Ave. (~375 yards), turn right onto 115 Ave., left into strip mall.

 

Well hey, its been a while... Too bad, it would be interesting to see how the twins on a the ol 12V would perform, especially with the 22.5" rubber.

I am still waiting on confirmation, but I probably am out too.