New Guy in VA
#4
Registered User
Welcome to the site, I also just bought a 2014 Ram 3500 Laramie but SRW. I am Canadian but I also lived in Virginia at one time. Colonial Heights. My Dad was on course at Ft. Lee VA.
Trending Topics
#8
Registered User
New to Diesels from South Central Virginia
Hello all,
I recently bought a 89' D250 and working at getting it ready as a daily driver. Have a bad ball joint on the passenger side that will require a new UCA, ball joints and a knuckle. I have everything either in hand on order to arrive shortly including the special socket needed for the upper ball joint. I also have a steady Water in Fuel indication which I'll change out the fuel filter and sensor in a day or two. Put a new tail pipe on it made from a old hemi pipe. Eyeing the 4" pipe but will wait until I've sorted the more pressing issues. Really liking this old truck. Seems to draw a lot of attention which I think is good... Only problem is I don't know anything about these trucks....
I recently bought a 89' D250 and working at getting it ready as a daily driver. Have a bad ball joint on the passenger side that will require a new UCA, ball joints and a knuckle. I have everything either in hand on order to arrive shortly including the special socket needed for the upper ball joint. I also have a steady Water in Fuel indication which I'll change out the fuel filter and sensor in a day or two. Put a new tail pipe on it made from a old hemi pipe. Eyeing the 4" pipe but will wait until I've sorted the more pressing issues. Really liking this old truck. Seems to draw a lot of attention which I think is good... Only problem is I don't know anything about these trucks....
Thread
Thread Starter
Forum
Replies
Last Post
rjm022
Performance and Accessories 2nd gen only
0
09-16-2007 08:33 PM
GrumpyTX
3rd Generation Ram - Non Drivetrain - All Years
9
08-03-2007 02:40 PM
Ls1z28fbody
3rd Generation Ram - Non Drivetrain - All Years
10
11-27-2006 08:03 PM