Pitman arm to drag link install....
04-14-2011, 07:40 PM
#1
Registered User
Thread Starter
Join Date: Apr 2004
Location: Edmonds WA
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
Pitman arm to drag link install....
I'm installing the upgraded steering linkage on my 06, and cant for the life of me get that bolt into the new pitman arm. The hole in the pitman arm is tapered, with the large end on the top of the pitman arm. I've got my 1/2" breaker bar on it, and its really tight right now, but not going into the hole. Any tips/tricks???? Do I need to stick the pitman in the oven for an hour?
Edit.....
Figured out that the arms goes on top of the pitman, not below....
Edit.....
Figured out that the arms goes on top of the pitman, not below....
Thread
Thread Starter
Forum
Replies
Last Post
edd209
3rd Gen Engine and Drivetrain -> 2003-2007
13
08-07-2010 11:55 PM
1985cucv
3rd Generation Ram - Non Drivetrain - All Years
4
11-03-2009 05:10 AM
BigDan
3rd Gen High Performance and Accessories (5.9L Only)
5
07-08-2006 11:04 PM