H2 wheels are finally on my ride.
#1
H2 wheels are finally on my ride.
I've been meaning to post this but haven't had a chance. Had them mounted up the other week. They have a great offset and gives the truck a good stance. The pics are sort of lame, my camera phone can only do so much and it was late one night.
#5
We machined them out here at work. I cut the caps down at home on my drill press. I mounted a 4" saw blade from my battery powered skill saw on a 5/8" bolt and then rotated the caps around it. Just had to be sure and go slow and keep my fingers out of the way. Worked great.
#6
Registered User
I hope that ol stain in the driveway isnt from your truck jokes. Nice work looks good..how do u like the bf's?
#7
DTR's 'Wrench thrower...' And he aims for the gusto...
Join Date: Oct 2003
Location: Smith Valley, NV (sometimes Redwood City, CA)
Posts: 2,668
Likes: 0
Received 3 Likes
on
2 Posts
We machined them out here at work. I cut the caps down at home on my drill press. I mounted a 4" saw blade from my battery powered skill saw on a 5/8" bolt and then rotated the caps around it. Just had to be sure and go slow and keep my fingers out of the way. Worked great.
John
Trending Topics
#8
I'm not sure about the safely part, but it's the only way I could figure out how to do it too. Clamping it and milling it down just didn't look like it was going to work well for me.
The spot in the drive is water. The guy who laid the concrete got a low spot in it. Now it freezes there and we bust our hinny's on it. He refused to do anything about it. So we have to live with it.
The spot in the drive is water. The guy who laid the concrete got a low spot in it. Now it freezes there and we bust our hinny's on it. He refused to do anything about it. So we have to live with it.
Thread
Thread Starter
Forum
Replies
Last Post
Rushford
3rd Generation Ram - Non Drivetrain - All Years
23
08-26-2007 07:21 PM
Gary C
3rd Gen High Performance and Accessories (5.9L Only)
27
03-11-2004 07:42 PM