It has been a while since I have checked on these.Has some body came up with a good heat/water shield for these yet or are they just being run without one.Can I get the filter # ect for hooking one of these up again.Thanks

 

Do a search and you'll find everything you need.

 

https://www.dieseltruckresource.com/...n&onlynewfaq=1

 

Outerwears.......

 

I should have mentioned that:

http://www.outerwearsracing.com/splashOLD.html

Seems like a lot of $ but well worth it.

 

Where are they at on the outerwears site? I cant find them??

 

They don't list them on the site, since it's a "specialized" filter.
You can either go to the "custom order" page or just give them a call,
that's how I got mine way back when.


phox

 

20-1085-02
WR3325-105

that is the numbers off the tag my outerwears came in... mine is the blue water resistant one for a bhaf [i used napa 2790] the invoice said fleetguard on it... they know about it... 10.5"x10.5" open top/bottom cylinder

 

Thanks for the part numbers. What did you give for yours? expensive?

 

They usually run about $40-$50 from what i hear.

Eric

 

I can't find my receipt, but I'm thinking it as around $30 for the outerwears.


phox

 

I just paid $26.75 plus shipping for my Outerwears (PN WR3325-105BK) for the Fleetguard AH19037 BHAF. Fit better than OJ's glove.

 

$26.75 is what I payed also.....well worth the money for the extra insurance and if you take the outerwears pre-filter cover off the filter still looks brand new...