ABDTR #5 Alberta Chapter #5 Discussion

Sniffing around for stock turbo for 04.5

Old Jan 25, 2011 | 10:42 PM
  #1  
Swamp_Donkey's Avatar
Thread Starter
Registered User
 
Joined: Aug 2001
Posts: 621
Likes: 0
From: Fort St. John B.C. Canada
Sniffing around for stock turbo for 04.5

After 458,000 kms mine might be on its way out. I am seeing some black oil dripping out of my intercooler on the cold side. Does not seem to be using oil, but I am thinking the end is near. Anyone upgrade and have one collecting dust that I could purchase?
Reply
Old Jan 25, 2011 | 10:43 PM
  #2  
Swamp_Donkey's Avatar
Thread Starter
Registered User
 
Joined: Aug 2001
Posts: 621
Likes: 0
From: Fort St. John B.C. Canada
For cheap!
Reply
Old Jan 26, 2011 | 09:07 AM
  #3  
Mike Holmen's Avatar
The Guru
 
Joined: Jan 2004
Posts: 6,589
Likes: 0
From: Airdrie Canada
I have a 03 turbo, its in rough shape. I would contact Rob (winksdiesel), he might have one. If you want a new aftermarket turbo, I can probably you help out. I have a S366/0.91/73 T-4, new available. Going to put that onto the 10 truck. Must have sold most of my stuff this year already. Some good buys on turbos, with the dollar above par to the USD.

Wow, that turbo lasted a long time 458000km.
Reply
Old Jan 29, 2011 | 09:06 PM
  #4  
krh's Avatar
krh
Registered User
 
Joined: Jun 2009
Posts: 246
Likes: 0
id consider it but i need a turbo to replace mine, of course your looking for one now, not in a week or two i assume. Unless mike has a good single for me to slap into my truck this weekend...?
Reply
Old Jan 30, 2011 | 08:33 AM
  #5  
Mike Holmen's Avatar
The Guru
 
Joined: Jan 2004
Posts: 6,589
Likes: 0
From: Airdrie Canada
You are more than welcome to the 03 turbo, I was just going to get it rebuilt. We can do an exchange if you want. I'll just get yours rebuilt. Holset is a pain to get parts from for the electronic stuff. Probably can get a device just to turn that part off and run an aftermarket turbo.

A S360 or S362 will work decently. I can get those pretty easy. Garrett has a nice turbo packages for replacing the stocker
http://www.turbobygarrett.com/turbob...2.5-2007.5.htm

I have to buy a GT3788R next week, I kinda want the third gen compressor housing, but it affects the air tubing position and air inlet ducting.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SOhappy
General Diesel Discussion
16
Sep 15, 2009 08:34 AM
jgiachino
3rd Gen High Performance and Accessories (5.9L Only)
4
May 12, 2008 02:06 AM
12PACK
General Diesel Discussion
15
Dec 30, 2005 04:05 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:42 PM.