Need an engine for a 2003 3500 or a rebuilder in Calgary
#1
Registered User
Thread Starter
Need an engine for a 2003 3500 or a rebuilder in Calgary
Just picked up this 2003 3500 and need an engine for it or a place in Calgary that rebuilds them. Could go to Red Deer as well, or Edmonton if I was REALLY desperate.
Fully loaded Diesel, 6spd, 4x4 with heated leather, dvd, the pedals even adjust for shorter/taller drivers! Got it for $8500 cause the engine is siezed. \/
Those H&H trailers are tougher than they look....... I'm glad I went to a heavier duty tire on it though.
Fully loaded Diesel, 6spd, 4x4 with heated leather, dvd, the pedals even adjust for shorter/taller drivers! Got it for $8500 cause the engine is siezed. \/
Those H&H trailers are tougher than they look....... I'm glad I went to a heavier duty tire on it though.
Trending Topics
#9
The Guru
Join Date: Jan 2004
Location: Airdrie Canada
Posts: 6,589
Likes: 0
Received 0 Likes
on
0 Posts
Jamie, you holding out on me. I'm interested. Is it in good running condition? How complete. PM me your PH# and I'll call you later in the week. I have to see, I'm still kinda dreaming about slamming a 6.7L into the old girl. Just waiting for painless to put together a wiring harness. Saw a few wrecked 6.7L trucks on ebay that sold cheap.
Clay, Peak had a few fresh 03 to 05 engine available, they might be gone but you never know. They priced them better than those #'s
Clay, Peak had a few fresh 03 to 05 engine available, they might be gone but you never know. They priced them better than those #'s
#10
Registered User
Join Date: Aug 2006
Location: Fort McMurray, Alberta
Posts: 5,426
Likes: 0
Received 0 Likes
on
0 Posts
Clay, look on ebay, awhile ago I had found a couple that were around 4 grand complete and running.
Are you going to be parting out the existing engine? If so let me know, I would sure like to get ahold of a reasonably priced 3rd gen head
kevin
Are you going to be parting out the existing engine? If so let me know, I would sure like to get ahold of a reasonably priced 3rd gen head
kevin
#11
Registered User
Join Date: Mar 2005
Location: Red Deer, Alberta
Posts: 3,190
Likes: 0
Received 0 Likes
on
0 Posts
Jamie, you holding out on me. I'm interested. Is it in good running condition? How complete. PM me your PH# and I'll call you later in the week. I have to see, I'm still kinda dreaming about slamming a 6.7L into the old girl. Just waiting for painless to put together a wiring harness. Saw a few wrecked 6.7L trucks on ebay that sold cheap.
Clay, Peak had a few fresh 03 to 05 engine available, they might be gone but you never know. They priced them better than those #'s
Clay, Peak had a few fresh 03 to 05 engine available, they might be gone but you never know. They priced them better than those #'s
#12
Registered User
Join Date: Aug 2002
Location: Alberta.......
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
Hello Clay-long time no see. I used to cross paths with you back when you and I were into Cherokees. I still have my old gray one-parked out back rapidly deteriorating now.
Check these guys out if you're looking for a new one-not sure what they have now. http://www.rj-performance.com/ They have a warehouse in Calgary-my brother bought a 12 valve head through them a few years ago that worked out OK.
I will also have a good running '01 24 valve engine for sale soon. It needs to be resealed as it's slobbering out of the rear main and between the gear case and block . I'll be listing it once I get the gaskets replaced. Ran like a champ before I pulled it.
Jason
Check these guys out if you're looking for a new one-not sure what they have now. http://www.rj-performance.com/ They have a warehouse in Calgary-my brother bought a 12 valve head through them a few years ago that worked out OK.
I will also have a good running '01 24 valve engine for sale soon. It needs to be resealed as it's slobbering out of the rear main and between the gear case and block . I'll be listing it once I get the gaskets replaced. Ran like a champ before I pulled it.
Jason
#13
Registered User
Clay, that truck looks really good.. and that trailer looks really small.
Seriously, it looks like it is in great shape.. Nice find.
I thought you said it was an automatic trans in your other thread about this truck but you mention 6 speed (manual) here.
If it is a 6 speed manual, that is an awesome find.
How many miles are on it?
As for a new engine, I would 1st start dismantling the old one before yanking it. Pull the head and have a look.
Perhaps you get lucky and just find a dropped valve in one hole and the short block is salvageable.
As for a used/rebuilt engines here is one option in Kalispell. Pricey but these are fully dressed which you would not need.
http://fordcummins.com/engines-for-sale.html
I've been to this shop and it is quite impressive. Plus I was drooling over a 2005 Superduty/Common rail/ZF6 manual trans conversion...
Good luck and keep us updated..
...Joe
Seriously, it looks like it is in great shape.. Nice find.
I thought you said it was an automatic trans in your other thread about this truck but you mention 6 speed (manual) here.
If it is a 6 speed manual, that is an awesome find.
How many miles are on it?
As for a new engine, I would 1st start dismantling the old one before yanking it. Pull the head and have a look.
Perhaps you get lucky and just find a dropped valve in one hole and the short block is salvageable.
As for a used/rebuilt engines here is one option in Kalispell. Pricey but these are fully dressed which you would not need.
http://fordcummins.com/engines-for-sale.html
I've been to this shop and it is quite impressive. Plus I was drooling over a 2005 Superduty/Common rail/ZF6 manual trans conversion...
Good luck and keep us updated..
...Joe
#14
Registered User
Thread Starter
Thanks for the tips guys. Yes it is a 6spd, before I saw it I thought it was an auto but its not. Would prefer an auto(yeah I'm lazy) but for the price I think I can make do.
How much power can the stock clutch and 6spd take? I have the Edge Juice w/attitude on my '01 and would like to put it on the new '03, website says it adds 150hp. I like the all in one package for the gauges and being able to change the HP level on the fly. If I have the engine out anyway I may as well put a HD clutch on if needed. Have heard that it runs hot EGTs when towing though, any comments? Anyone have it on an '03-'04?
How much power can the stock clutch and 6spd take? I have the Edge Juice w/attitude on my '01 and would like to put it on the new '03, website says it adds 150hp. I like the all in one package for the gauges and being able to change the HP level on the fly. If I have the engine out anyway I may as well put a HD clutch on if needed. Have heard that it runs hot EGTs when towing though, any comments? Anyone have it on an '03-'04?