StealthDiesel

A few years ago I called around a few local industrial shops & it was over $20 each locally.
I think I called Corona Supplies, Acklands, Greenline, etc..


I ran the Fleetguard FF5320 (5 micron even though it's labelled 2 micron) for years until I found out that the Donaldson P551313 (2-3 micron)was better.

The Fleetguard FF5320 is readily stocked & available at Cummins in Calgary if you are in a pinch.. About $20 each the last time I bought one.

Eat Beef

Thanks everyone. I found the P551313 on the internet for $6.50 each. Can't remember the site at the moment. I'll find it again some day and post it for you guys. Just found it. "Ryder Fleet Products"

DWeiler

FYI---if you are going to piece together your own kit the FB1311 Baldwin fuel base is $50.47each at Aklands in Calgary(this is with my company/work discount).I will probable tackle this in the spring----just sourcing out parts/costs now.Hope this helps.DW----PS earlier in another post it was stated that the base was $20.00----is this correct and where to buy at this price,cause i double checked and bases are over $50bucks here---USA around $27-$35 bucks.

ironbrew

I've purchased about 6 of these over the last couple of years, and never over $30. The price of $20 came from somebody who had just purchased one which we installed. He did have a company discount though.

Your price of $50 is high, so they must have taken a big jump. May want to check places like Finning, FGI, any of the big truck places...

DWeiler

THANKS---going to shop around.Cheers

ironbrew

I went and checked today. The list price is about $51. Depending on the various company affiliations, you can get it significantly lower...

stevenl

with a inline filter/water sep set up how are you guys attaching the lines from the filter to the engine are u just installing push lock barbs on the cp3 and running new line?? and from the tank canister wtih the plastic push lock fittings to the filter? what are u guys using there?

ironbrew

An expensive (but nice) route is to get custom hydraulic lines made up. Works really slick.

Or use pushlock.

1-5-3-6-2-4

push loc. I used goodyear Gatorgrip hose when I re-hosed my own truck. Use it tons at work for fuel or air. good to 300 psi.