3rd Generation Ram - Non Drivetrain - All Years Talk about the 2003 and up Dodge Ram here. PLEASE, NO ENGINE OR DRIVETRAIN DISCUSSION!.

Upper and lower ball joints

Old Apr 10, 2007 | 08:53 PM
  #1  
dylan's Avatar
Thread Starter
Registered User
 
Joined: Oct 2004
Posts: 17
Likes: 0
From: corona
Upper and lower ball joints

Hello all,

I just turned 46000 and found out I have to replace my upper/lower ball joints . I tried to search and didn't find much, is this common? I drive some roads that are ruff in some areas, would this be the cause? Are there any good after market?

Anything else I should check?

Regards.
Reply
Old Apr 10, 2007 | 09:00 PM
  #2  
smokindog's Avatar
Banned
 
Joined: Mar 2005
Posts: 1,057
Likes: 0
Originally Posted by dylan
.... I drive some roads that are ruff in some areas, would this be the cause?

Ding ding ding.... we have a winner.....

46K is a little soon, but not unheard of.
Reply
Old Apr 11, 2007 | 09:08 AM
  #3  
Peterbilt's Avatar
Registered User
 
Joined: Jan 2004
Posts: 678
Likes: 0
From: near Austin, Texas
I replaced mine with Moog greasables at 75K. They were probably OK, but I'm pretty proactive (hate that word) . Had the dealer install them. They did a poor alignment and told me it was because of the upper Moogs and that I will always have a problem. Took it NTB for an alignment and now it drives like new. There are other brands that are greasable, but not adjustable.

Pete
Reply
Old Apr 11, 2007 | 01:30 PM
  #4  
CrazyCooter's Avatar
Registered User
 
Joined: Jul 2006
Posts: 632
Likes: 1
From: Redding, CA
My left side already has play @ 8400 miles.

Anyone know what the spec. is for warranty claim?
Reply
Old Apr 11, 2007 | 11:41 PM
  #5  
Raspy's Avatar
DTR's 'Wrench thrower...' And he aims for the gusto...
 
Joined: Oct 2003
Posts: 2,668
Likes: 3
From: Smith Valley, NV (sometimes Redwood City, CA)
Peterbilt,

How did you know yours were worn out? Did it drive poorly, like wandering or pulling? I have just over 100,000 on mine now and it drives like it always has except I think it's pulling to the right more than before. I lke the idea of the adjustables. I wonder if they are stronger than the stockers?

Wetspirit
Reply
Old Apr 12, 2007 | 06:43 AM
  #6  
Peterbilt's Avatar
Registered User
 
Joined: Jan 2004
Posts: 678
Likes: 0
From: near Austin, Texas
Wetspirit,

I'm not sure if they were bad enough to replace them at this time. When I checked them by jjacking up and using a lever to check for play, I noticed a very slight movement, but that may have been enough. I think it's .060 for uppers and .090 for lowers. I injected grease into them with a needle adapter and couple of times. I was a little agressive with the greasing the last time and ran the needle out the other side, duh! The reason I went ahead and changed them is I had some wandering, not bad. I replaed the stabilizer and no help. I had the money at the time, so I had it done.

Pete
Reply
Old Apr 12, 2007 | 02:41 PM
  #7  
neversatisfied's Avatar
Registered User
 
Joined: Jan 2006
Posts: 66
Likes: 0
From: Lancaster, Ohio
I have 46,000 miles on my truck and noticed a little dart and dive. I jacked up the front end, grabbed the top and bottom of the wheel and felt some play. I thought this indicated bad wheel bearings, or is it the ball joints.
could someone help me clarify this?
Thanks
Steve
Reply
Old Apr 13, 2007 | 06:11 PM
  #8  
yamarx1's Avatar
Registered User
 
Joined: Apr 2007
Posts: 84
Likes: 0
From: wisconsin
upper and lower ball joints

I have 52000 miles and I just spent $1100.00 to have my uppers and lowers replaced. Not real happy about it, to me this is premature wear. Talked to Dodge 3 times and got no where they said there hasn't been enough complaints to warrant a recall. Prior to 38000 miles had every universal joint replaced, and along with my ball joints had to replace front driver side universal again. The service joked about how at least I got 29000 miles this time with it before had to replace.
Reply
Old Apr 16, 2007 | 01:41 PM
  #9  
shonne's Avatar
Registered User
 
Joined: Aug 2006
Posts: 194
Likes: 0
From: Hutto, Texas
Originally Posted by CrazyCooter
My left side already has play @ 8400 miles.

Anyone know what the spec. is for warranty claim?
I am getting the right replaced tomorrow. Warranty claim.
Reply
Old Apr 17, 2007 | 08:07 PM
  #10  
yamarx1's Avatar
Registered User
 
Joined: Apr 2007
Posts: 84
Likes: 0
From: wisconsin
how many miles?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
EdmontonCanada
3rd Gen High Performance and Accessories (5.9L Only)
37
Feb 4, 2016 12:02 PM
exwrestler
3rd Gen Engine and Drivetrain -> 2003-2007
7
Apr 28, 2014 09:55 AM
Scotty
HELP!
2
Jun 20, 2008 04:25 PM
05dodgezilla
3rd Gen High Performance and Accessories (5.9L Only)
5
May 31, 2008 10:36 PM
AUGIE DOG
1st Gen. Ram - All Topics
18
Apr 6, 2007 07:45 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:12 AM.