Re-gear with limited slip
#1
Re-gear with limited slip
Hi all,
When re-gearing a truck from a 3.55 to a 4.10, does the factory limited slip need to be replaced, or will it work with the new ring and pinion? Thanks.
Gman
When re-gearing a truck from a 3.55 to a 4.10, does the factory limited slip need to be replaced, or will it work with the new ring and pinion? Thanks.
Gman
#2
Dodge hasn't used 3.55's in the 3rd gens, you should have 3.73's. I am upgrading the gears in my 04.5 and according to 6 states the carrier doesn't need to be changed in order to swap to 4.10's. I hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
sallyman1
3rd Gen Engine and Drivetrain -> 2003-2007
1
04-08-2013 07:46 PM