Mud flaps for 2004.5 ram 2500 4x4??
#1
Registered User
Thread Starter
Join Date: Jun 2005
Location: Florida Panhandle
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Mud flaps for 2004.5 ram 2500 4x4??
Lokking for Mud flaps for 2004.5 ram 2500 4x4??Whats the best??
Id like the Cummings logo.
please post pics and ideas..Thanks
Id like the Cummings logo.
please post pics and ideas..Thanks
#2
Registered User
I have the Husky molded flaps, they are the same as the Mopar molded flaps except they come with 3M tape to protect from any paint rubbing. The Cummins Logo I added. They have done fine so far as far as rock dings go. They are just enough to protect from the 315s on stock back spacing.
#3
Registered User
Thread Starter
Join Date: Jun 2005
Location: Florida Panhandle
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by RamWheelsBy4
I have the Husky molded flaps, they are the same as the Mopar molded flaps except they come with 3M tape to protect from any paint rubbing. The Cummins Logo I added. They have done fine so far as far as rock dings go. They are just enough to protect from the 315s on stock back spacing.
I have the Husky molded flaps, they are the same as the Mopar molded flaps except they come with 3M tape to protect from any paint rubbing. The Cummins Logo I added. They have done fine so far as far as rock dings go. They are just enough to protect from the 315s on stock back spacing.
Thats a lot of cash in emblems isnt it??
18 bucks a piece??
#5
Registered User
94HO600
I used the two from the fender when debadged. But the other two were about what you said. They are the only badges on the truck currently.
drafto,
I did switch to stock steel chrome clad wheels a few months back. I ran across a set of 4 with slightly used 315s very cheap. Then found a set of 4 wheels very cheap. Now have 5 315s on steel clad. The chrome clad match the trim much better IMO.
I used the two from the fender when debadged. But the other two were about what you said. They are the only badges on the truck currently.
drafto,
I did switch to stock steel chrome clad wheels a few months back. I ran across a set of 4 with slightly used 315s very cheap. Then found a set of 4 wheels very cheap. Now have 5 315s on steel clad. The chrome clad match the trim much better IMO.
#6
Registered User
Join Date: Mar 2004
Location: Oakley Ca.
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
#7
Registered User
94:
I got the ones from the cummins power store. You can look @ my gallery for a pick. I like them. I did get the mopar ones on my previous truck, the ones that mold into the body. Forget those. They will rub your paint of. So be careful.
I got the ones from the cummins power store. You can look @ my gallery for a pick. I like them. I did get the mopar ones on my previous truck, the ones that mold into the body. Forget those. They will rub your paint of. So be careful.
Thread
Thread Starter
Forum
Replies
Last Post
JasonCzerak
3rd Gen All Products
0
07-21-2015 08:14 PM
DECJ
3rd Generation Ram - Non Drivetrain - All Years
12
07-07-2009 09:25 AM
tool
Performance and Accessories 2nd gen only
14
03-16-2004 07:31 PM