I ordered the four door repair and replace kit yesterday from heatertreater.net . Mine just blows out of the dash now.
Thans for all the first hand experinces and great advice!
MERRY CHRISTMAS !!!!
HAPPY
NEWYEAR!!!

 

Well my HeaterTreater parts just came today. Need to drop by a buddy's shop and get the AC discharged sometime to get going on the repairs/replacement.

What's the average cost of a heater core & AC coil both Dodge & aftermarket. Have not gotten quotes yet, don't know what to expect.

Where can I find more info on the fin sensor? I have had freeze up issues in the past. My mechanic friend topped off the refrigerant, but said it wasn't really all that low, but the problem was a bit better after he did so.

thanks and Merry Christmas everyone.

Todd

 

I received my Heatertreater doors today also.Bought all four.gonna have a friend help( i'm gonna watch) and gonna attack this job next weekend.
Quick service from Heatertreater.

 

I have additional pics that I took when I fixed all my doors (me and the wife tackled it back in August). The door for the floor hinge had broken and my local dealership told me that Dodge had re-designed the entire system and I couldn't replace that one small part and they would only let me buy the entire system for $1,300!! I said no way and I did a MacGyver and fixed it for about a buck or two. I have been way too lazy to post the pics and do a write-up on how I did it.

 

Mine broke on my 06 at 12k miles. I dropped the glovebox door,took 3 fan screws out, pulled the fan and reached in there and got the broken door out. I put the fan back in and havent worried about it since. Stuff seems to be all working ok, even defrost and controls work normal in summer/winter.

 

going at it today,never did see any pics from ratlrat,but i did buy the modified box from dodge and om gonna drop the dash, i will let you know....

 

I got started last evening, couldn't get the box out as one of the AC lines refused to release. Going out this morning to try and find a better quick release tool.

 

I think the hardest part of the whole process is getting the A/C lines off!

 

^^^^^^ Agreed!!

 

ok i read this thread and everyone blamed low feon for when cooling temp was different on pass/ driver side ,mine does this on heat so its not freon .driver side has almost no heat.any help please

 

Finished mine up Sunday afternoon. Took almost 4 hours to get the one AC line disconnected. Rest of the job was fairly simple.

 

Does this issue affect 2007 and upward. I notice everyone with this issue has 2006 or earlier?

 

what tool did you use?

 

The split, spring loaded clambshell style.

 

Excellent POSTS-like OP I am wondering when mine will fail and it will be my turn in the barrel.
Great info guy --thanks