Code P0107
08-06-2016, 10:22 PM
#1
Registered User
Thread Starter
Join Date: Aug 2004
Location: Roseville, CA
Posts: 613
Likes: 0
Received 0 Likes
on
0 Posts
Code P0107
P0107 MANIFOLD ABSOLUTE PRESSURE SENSOR CIRCUIT LOW. What is this and how do I fix it? CEL comes on and off and this is the code that is set.
08-07-2016, 07:51 PM
#2
Registered User
Could be wiring or the inlet air temperature/pressure sensor or worse, the ECM.
Check the wiring for any shorts/melted wires or loose wires. I would think with the CEL turning on or off, it could be the sensor is being intermittent (on its way out) or something is wrong with the wiring.
Check the wiring for any shorts/melted wires or loose wires. I would think with the CEL turning on or off, it could be the sensor is being intermittent (on its way out) or something is wrong with the wiring.
Thread
Thread Starter
Forum
Replies
Last Post
1985cucv
3rd Gen Engine and Drivetrain -> 2003-2007
1
04-04-2009 09:30 PM
53 willys
3rd Gen Engine and Drivetrain -> 2003-2007
33
06-07-2007 11:01 PM