06 2500 Front bumper removal
#2
This thread may help https://www.dieseltruckresource.com/...p-t212674.html
#3
This thread may help https://www.dieseltruckresource.com/...p-t212674.html
#4
Registered User
I just pulled mine the other day. It was only the 4 bolts, but I did have to move my intercooler a bit to get the bolts out on the passenger side. Yours may be a little different though.
#5
There is no G. There is no G. Repeat after me, THERE IS NO G!
I pulled my bumper off without messing with intercooler bolts. It was just the 4 big bolts on each bracket.
Here's a pic, the bolts in the yellow circle (ignore the red arrows). The four of those bolts is what I pulled off to swap stock SLT bumper for Frontier Gear full replacement.
Here's a pic, the bolts in the yellow circle (ignore the red arrows). The four of those bolts is what I pulled off to swap stock SLT bumper for Frontier Gear full replacement.
Thread
Thread Starter
Forum
Replies
Last Post
06megacabman
3rd Generation Ram - Non Drivetrain - All Years
12
07-31-2008 10:45 AM
njmaier
3rd Generation Ram - Non Drivetrain - All Years
1
12-18-2006 03:01 PM