I have a 2009 Mega Cab 2500 4X4 that needs some lift in the front end. I have looked at spacers and new coils, and I have decided to go with new coil springs.

I would like to bring the front end up about 2", but I need a coil spring that will carry the weight of a 850# plow and not jar my filings out on every bump.

So, I am looking for suggestions..... Thanks.

 

I would look at these http://lorenzindustries.com/products_coils.html

 

Also check out Don Thuren's 3" coils. Thuren Fabrication. He has excellent products

 

What plow setup are you using? The reason I ask is my most manufacturers a have set up height for the push frame from ground so that the plow will stay even with the ground. My is 11 3/4 -12". With air cells the front drops less than an inch. Plow weighs 985lbs. They carry it well and with both spacers it sits well. IMHO

 

I will be using a Western "Wide out" plow. But I'm not worried about the frame height of the plow as I will have to modify the frame anyway due to the fact that I run oversized 315 tires. As they say "Have Plasma Cutter and Welder, will travel".