code map sensor voltage too low and/or boost sensor level too low
#1
Registered User
Thread Starter
Join Date: Feb 2008
Location: Upstate New York
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
code map sensor voltage too low and/or boost sensor level too low
I got this code. I have had it before but it goes away. However my snow performance stage 2 water/meth injection now doesn't work. Would this have something to due with the code? I have checked for boost leaks but found none. When driving, boost seems to be normal (65mph @ 12-13 boost with twins).
#4
Registered User
Do you still get the same code with the TST removed?
If so possibly there's an issue with the MAP sensor or wiring. Look for chaffing on the wiring harness braces in that area.
MikeyB
If so possibly there's an issue with the MAP sensor or wiring. Look for chaffing on the wiring harness braces in that area.
MikeyB
#5
i have had this code a few times too since i put in the smarty. I was running a fooler with the smarty and since i took out the fooler i haven gotten it again.
Dont know if this helps you, but just thought i would write my experience with it.
Dont know if this helps you, but just thought i would write my experience with it.
Thread
Thread Starter
Forum
Replies
Last Post
jmccart
3rd Gen High Performance and Accessories (5.9L Only)
4
12-21-2007 06:00 PM
Marks99
24 Valve Engine and Drivetrain
0
08-23-2006 06:24 PM
cheff
3rd Gen Engine and Drivetrain -> 2003-2007
9
01-23-2006 09:44 AM