XD rims, anyone run them?
#16
Registered User
Join Date: Apr 2006
Location: Beaumont Alberta Canada
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
I've got the 18" RS's with BFG AT's, I've been beating on them pretty hard the last couple of weeks hauling heavy loads in the bush, no problems so far (crossing fingers)
pic'd hauling 1100gal of good ol 1202
pic'd hauling 1100gal of good ol 1202
#18
Registered User
Join Date: Apr 2004
Location: Sturgis SD
Posts: 1,609
Likes: 0
Received 0 Likes
on
0 Posts
The 17inch diesels wont fit right. Believe me they were a pain in the rear on mine. But all the others will fit. I got mine for next to nothing so thats why i made mine fit.
#19
I have a set of 20 x 12 rockstars chrome on one truck, and 20 x 9 monsters black on the other and I really like the wheels. I did have one problem with the rockstars, but XD handled it and haven't had a problem since.
#22
Registered User
Join Date: Oct 2006
Location: Queen Creek, AZ
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Just mounted my wheels and tires. 35's (Toyo Open Country ATs) around 22's with just a leveling kit as talked about in a post above.
Must say I'm very pleased. I had 35's (Toyo OC ATs) around 20's before and got a slight rub at full lock and was a little nervous that the 22" combo would be worse, especially since the new 22" rims were 1/2" wider than the 20's that were on my truck. I did my best to find the right fit and am happy to report no rubbing at all. Zero, nada.
Will let you know how they hold up over time. I pull a 35' 5th wheel toy hauler to the sand dunes that, when loaded, weighs a lot....
Must say I'm very pleased. I had 35's (Toyo OC ATs) around 20's before and got a slight rub at full lock and was a little nervous that the 22" combo would be worse, especially since the new 22" rims were 1/2" wider than the 20's that were on my truck. I did my best to find the right fit and am happy to report no rubbing at all. Zero, nada.
Will let you know how they hold up over time. I pull a 35' 5th wheel toy hauler to the sand dunes that, when loaded, weighs a lot....
#23
Registered User
Just mounted my wheels and tires. 35's (Toyo Open Country ATs) around 22's with just a leveling kit as talked about in a post above.
Must say I'm very pleased. I had 35's (Toyo OC ATs) around 20's before and got a slight rub at full lock and was a little nervous that the 22" combo would be worse, especially since the new 22" rims were 1/2" wider than the 20's that were on my truck. I did my best to find the right fit and am happy to report no rubbing at all. Zero, nada.
Will let you know how they hold up over time. I pull a 35' 5th wheel toy hauler to the sand dunes that, when loaded, weighs a lot....
Must say I'm very pleased. I had 35's (Toyo OC ATs) around 20's before and got a slight rub at full lock and was a little nervous that the 22" combo would be worse, especially since the new 22" rims were 1/2" wider than the 20's that were on my truck. I did my best to find the right fit and am happy to report no rubbing at all. Zero, nada.
Will let you know how they hold up over time. I pull a 35' 5th wheel toy hauler to the sand dunes that, when loaded, weighs a lot....
#24
Registered User
Join Date: Oct 2006
Location: Queen Creek, AZ
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
#27
Registered User
Join Date: Oct 2006
Location: Queen Creek, AZ
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
I bought the truck with the level kit already installed, so I'm not sure what brand of kit that is. I just looked thru my receipts that the previous owner gave me and didn't see it there either. I'll look on the truck itself tomorrow and see if I can tell. Sorry....
#30
Registered User
Join Date: Apr 2006
Location: Beaumont Alberta Canada
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
Jim Lane
1st Gen. Ram - All Topics
7
06-28-2014 11:27 AM
stock600
3rd Gen Engine and Drivetrain -> 2003-2007
29
12-31-2007 10:41 AM
Jim Fulmer
Performance and Accessories 2nd gen only
48
01-29-2003 10:21 PM