Water Injection
Registered User
Joined: Jan 2007
Posts: 1,572
Likes: 2
From: kearneysville wv
Administrator
Joined: Mar 2002
Posts: 8,311
Likes: 52
From: Holly Ridge, N.C.
Thanks for all the advice guys. Is it better to run the spray based on boost or egt? At WOT my boost reads about 45psi. I only plan on using the system for playing but if I decided to use it while towing would it be better to spray based on egt so that it will not consume so much water? The problem for me is that there are SO MANY options it gets a little confusing. Again, THANK YOU VERY MUCH for the help. BTW my intake horn has 2 large ports and 1 small port left free.
From my end,......you are very welcome rock crawler!
I know that Robert feels the same way too. You are right that there is "alot of options" from "mild to wild!"
But,......I know you will find a system that will work good for your vehicle.Good luck!
Registered User
Joined: Jan 2007
Posts: 1,572
Likes: 2
From: kearneysville wv
---------------------------------------------------------------
From my end,......you are very welcome rock crawler! I know that Robert feels the same way too. You are right that there is "alot of options" from "mild to wild!" But,......I know you will find a system that will work good for your vehicle.
Good luck!
From my end,......you are very welcome rock crawler!
I know that Robert feels the same way too. You are right that there is "alot of options" from "mild to wild!" But,......I know you will find a system that will work good for your vehicle.Good luck!
Registered User
Joined: Oct 2007
Posts: 76
Likes: 0
From: Silver city N.M.
So I just ordered the snow stage 2 kit. Going to be using it for hi egts while towing. Its been getting kinda cold here, supposed to be 18 tonight. I guess I can use windshield wiper fluid,as long as it doesnt have glycol in it right? And what kind of mix? I ordered the 7 gallon tank also. I was thinking 6 gallons of distilled water, and 1 gallon of the peak windshield wiper fluid. How does that sound? Is that enought to keep it from freezing? Is that to much meth for towing?
Registered User
Joined: Apr 2004
Posts: 8,234
Likes: 1
From: Texas/Oklahoma Border
Your talking 20% meth in wiper fluid watered down x 6. 3.3% meth may not be enough , depending on your temps, and how long it stays below 32*. I'd go ALL Wiper fluid... in winter at least.
20% is not a lot of meth. Have studs?
RJ
Registered User
Joined: Oct 2007
Posts: 76
Likes: 0
From: Silver city N.M.
No I dont have studs. And yes peak had meth in it, dont know how much but it was the minus 20 stuff. So around 20% will be ok to tow with? Thanks. Is this to much cylinder pressure to not have studs?
Registered User
Joined: Apr 2004
Posts: 8,234
Likes: 1
From: Texas/Oklahoma Border
If 03's have full metal gasket and are machined for head fit, like the later models...you're fine.
If not...if head and gasket are like the 2nd gens, I would not run meth at all, without studs.
RJ
Administrator
Joined: Mar 2002
Posts: 8,311
Likes: 52
From: Holly Ridge, N.C.
No, I haven't heard anything about that all. But,...I haven't talked with Tim in awhile either.
--------
John_P
Registered User
Joined: Nov 2007
Posts: 30
Likes: 0
From: Huntsville,AL
Anyone looked into running multiple smaller nozzles that have finer micron atomization than larger nozzles. I would think there would be better distribution of smaller water molecules than larger ones.
Administrator
Joined: Mar 2002
Posts: 8,311
Likes: 52
From: Holly Ridge, N.C.
RLL:
Yes, I did awhile back and it helps, but it still does not do as good a job as putting the nozzles right into the ports of the intake manifold.
---------
John_P
Registered User
Joined: Jan 2007
Posts: 1,572
Likes: 2
From: kearneysville wv
