TST VS. Smarty!!
Thread Starter
Registered User
Joined: Jan 2006
Posts: 1,589
Likes: 0
From: McConnellsburg, PA
I don't think the TST will fuel that far. If you get to the point that you have the mods to run the REVO/R.... I don't think you'll even want the TST on there too. I think the TST level of tuning is where Marco is going with the REVO tunes.
The are two different beasts. As you may know the Smarty is a downloader that sets difference ECM parameters where the TST is a inline signal manipulator. IMO...You won't want to add timing, pressure and power from both boxes, that may be a little excessive in each department.
I would say though... if you are going to run them both
keep your eye on things !!! You'll really need to work on tuning to get it right.
The are two different beasts. As you may know the Smarty is a downloader that sets difference ECM parameters where the TST is a inline signal manipulator. IMO...You won't want to add timing, pressure and power from both boxes, that may be a little excessive in each department.
I would say though... if you are going to run them both
keep your eye on things !!! You'll really need to work on tuning to get it right.Since my Smarty isnt adding any pressure and if i run even #'s i should be able to add pressure and timing with the TST right? That might be a stupid question but better safe that sorry u know.
Banned
Joined: Dec 2006
Posts: 1,806
Likes: 0
From: NC
Thats what i was thinkin but had to ask just seen a few fellas that had the TNT/R and still had the TST in there, not sure what settings the TST was on though.
Since my Smarty isnt adding any pressure and if i run even #'s i should be able to add pressure and timing with the TST right? That might be a stupid question but better safe that sorry u know.
Since my Smarty isnt adding any pressure and if i run even #'s i should be able to add pressure and timing with the TST right? That might be a stupid question but better safe that sorry u know.
But, as i said... if you get to the point you can run TNT or REVO/R that allows you to adjusted all those same parameters... watch how you set things !
The TST fuels really hard too and even with your Airdog you could run the rail dry. Your single CP3 won't be able to keep up.
Registered User
Joined: Jan 2006
Posts: 3,597
Likes: 0
From: Indiana
the tst is very powerful in its own way. like stated before the tst and the smarty work good together from what ive seen. the tst stacked with something else is a very powerful combo. in my opinion the tst is one of the most powerful boxes there is
Thread Starter
Registered User
Joined: Jan 2006
Posts: 1,589
Likes: 0
From: McConnellsburg, PA
Registered User
Joined: Jan 2006
Posts: 3,597
Likes: 0
From: Indiana
same here mine was built in 06/2006. I ran one for a while but decided to just run injectors because of all the risk with my build date. I really wish they would figure out the issues with the tst I would really like to run one again someday
Thread Starter
Registered User
Joined: Jan 2006
Posts: 1,589
Likes: 0
From: McConnellsburg, PA
Man i hope they get it figured out for u fellas cause i love mine!
I do have a bit of timimg rattle like if i have it set at 12* in auto mode and ease into the trottle and then if i ease back out of it.
I do have a bit of timimg rattle like if i have it set at 12* in auto mode and ease into the trottle and then if i ease back out of it.
Registered User
Joined: Feb 2008
Posts: 397
Likes: 0
From: Vancouver Island BC
The TST is a great performance box, and I would stack one with my Smarty if I could (they don't make one for the 06-07), but this combination can, will, and does destroy engines.....So be careful how you set it.
Check it out.
http://www.competitiondiesel.com/for...ad.php?t=25398
Check it out.
http://www.competitiondiesel.com/for...ad.php?t=25398
Muted User
Joined: Jan 2006
Posts: 713
Likes: 0
I saw that video and it makes me worried since I'm supposed to dyno next month. My TST is OLD SCHOOL it's serial # is like 1300 so I don't have the rail pressure or the adjustable timing so I guess I'm going to be sure to only use the non timing Smarty programs. With twin CP3's, twin turbos and stacked boxes the only time I want to see any of my connecting rods is when I choose to.
Thread
Thread Starter
Forum
Replies
Last Post
Topper
3rd Gen High Performance and Accessories (5.9L Only)
6
Mar 3, 2008 10:17 AM
LooseBoltsRob
3rd Gen High Performance and Accessories (5.9L Only)
17
Jun 10, 2007 08:52 PM
lewis369
3rd Gen High Performance and Accessories (5.9L Only)
6
May 29, 2007 06:23 PM
smoky beast
3rd Gen High Performance and Accessories (5.9L Only)
28
Oct 13, 2006 01:15 PM
CTD_Neil
Performance and Accessories 2nd gen only
10
Feb 23, 2006 09:27 PM
