With what I have in my sig for power adders does 375 rwhp and 710 ft pds trq sound right? I have some other guys on the fourums with less pushing like 25 more ponys than I am..Or so they say, just wonderin, this is what I dyno'ed last with the Jr set on SW#3.

 

There are a lot of facters that affect power output. More specifically, there are a lot of facters that affect the dyno chart.

A specific parts combo has the potential to make a certain amount of power. But, until you get it on the dyno and do some tuning, it will never reach it's full potential, and you'll never know the exact power number.

 

Agreed. Dyno's are different. Did you dyno it, or did the dyno operator do it? Did he/you build any boost before you pushed the button?

Where at in SW Fl? I'll be down next month... I'll let you borrow my smarty to use on the dyno...

 

Two differnt places I dyno'ed at both DynoJet 248, the one the dyno operator did it and the second I did the run, yes I built up the boost on the one I did. The one the operator did I don't belive he really built up very much. Mad I live down in the Ft. Myers area.

 

That is SW Fl... I'm coming to Okeechobee on the 9th of Nov...

 

Yeah, I wasn't lie-in when I said SWFL. At least I am not further south like a couple guys. I am actually about 20 mins out side Ft. Myers to the east in Lehigh Acres. Most people do not know where it is so you have to tell them Ft. Myers.

 

I think it sounds right if I read correctly that your only power adder is a Smarty Jr. That's actually higher than I would have expected......

 

I was just going to say that.
You need to get rid of junior and get it's big brother or a BDTD with CL.

 

Thanks guys, I am gettin ready to get some tranny work done and will more than likely go with the Sr. with a Dr.P stack. Then of course sticks and turbo.

 

Do yourself a favor and et some gauges first...

 

Yeah, ordering them this weekend, thanks, forgot to say that.