3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

passenger side 3 gauge pillar pod?

Old Aug 26, 2006 | 09:45 PM
  #1  
rustyshakelford's Avatar
Thread Starter
Banned
 
Joined: Dec 1969
Posts: 0
Likes: 0
passenger side 3 gauge pillar pod?

Im looking for a passenger side 3 gauge pod for the a post. has anyone seen these or am i crazy. im not to keen for the above the mirror because of the logistics of install and dont know where else to install some more....any help would be appreciated.

thanks

brett
Reply
Old Aug 26, 2006 | 11:42 PM
  #2  
RamWheelsBy4's Avatar
Registered User
 
Joined: Aug 2004
Posts: 3,697
Likes: 1
From: Houston, TX
Never seen one. You gonna have the shotgun give you the gauge readouts?? They would be pretty hard to monitor while driving over there.
Reply
Old Aug 27, 2006 | 10:37 AM
  #3  
FMB's Avatar
FMB
Registered User
 
Joined: Apr 2005
Posts: 1,222
Likes: 69
From: Old Norte Mexico
Originally Posted by bretteaton
im not to keen for the above the mirror because of the logistics of install and dont know where else to install some more
I installed the above mirror type and loved it for the 4 months or so that it lasted. Its in a great, logical location. You are used to glancing up there and focusing anyway. The thermocouple's power module (whatever it's called) sits above the passenger headliner, which pulls down easy. The thermocouple wire came through the passenger side firewall and up the passenger side A post, the fuel and boost came through the driver's side firewall and up the driver's side A post. Everything fit nicely.

Right after I installed it in late April or early May last year, we drove up to Alaska from CA, up through BC and YT. Six weeks, beautiful drive, down through YT, BC, AB, Montana, and back to CA. About 10k miles. The pod above the mirror was flawless.

Now, the down side. The temps here in CA occasionally get into the high 90's and up to about 104 (111 this year). The sun beats down on the black dotted area above the rear view mirror where the black plastic pod lives. The stickum that holds the velcro to the windshield and to the pod began to slip and wouldn't hold any longer. In fact, when I finally took it down, I could see where the plastic pod was beginning to deform from the heat.

Geno's had worked with me to re-stick the pod on the windshield, but it didn't seem to matter how clean the windshield was or how long I allowed the stickum to cure without the stress of weight (several days, one time), it just couldn't take the heat.

Geno was great, sent me a Driver's side triple guage pod for my troubles. I installed that. I don't like it as much as I don't like looking that way naturally and it seems to be a different focal lenght for my eyes (getting older). I also lost the grab handle but that isn't to much of a loss.

But, that is what I have now and I'll stick with it. I can't imagin sticking guages over where the war department would have to read them. Keep them on my side where I believe they belong.
Reply
Old Aug 27, 2006 | 10:54 AM
  #4  
rustyshakelford's Avatar
Thread Starter
Banned
 
Joined: Dec 1969
Posts: 0
Likes: 0
thanks for all the input. i already have the driver side A pillar mount, but im wanting to add more gauges. still dont know what all yet other than for sure a fuel pressure. i was also thinking about some others. maybe another trans temp that would go in an aftermarket pan. does anyone have anymore gauges that they would install?

also the passenger would be great IMO for some of the ones you dont need to be monitoring all the time. if i put the FP over there i would probably have the red LED also to alert me if immediate action is required...

thanks

brett
Reply
Old Aug 27, 2006 | 11:35 AM
  #5  
973604x4's Avatar
Banned
 
Joined: Apr 2006
Posts: 3,141
Likes: 0
From: College Station, Texas
have you thought about the gauge mounts on the steering column?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
thunderbird516
3rd Generation Ram - Non Drivetrain - All Years
2
Aug 24, 2009 12:39 PM
cquestad
3rd Gen High Performance and Accessories (5.9L Only)
258
Jan 22, 2006 09:58 AM
timk006
3rd Generation Ram - Non Drivetrain - All Years
15
Sep 9, 2005 11:34 AM
5.9thatsmokes
1st Gen. Ram - All Topics
1
Feb 25, 2005 10:09 AM
Iron Horse
Performance and Accessories 2nd gen only
9
Jun 14, 2003 12:04 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:12 PM.