I blew up my 05 dodge and have $3500.00 to spend. i melted holes in 5 of 6 pistons. help me spend my money. im already getting my head ported and polished, need to bore block or sleeve, let me know.

 

a bigger turbo so you dont do it again and another programmer with less timing

brett

 

That's got to be one of the funniest things I've read recently.

 

just trying to help

brett

 

Fire ring the block and head. Ceramic coated pistons, bottom tap the block for 14mm studs. Thats if I had the money. oh and what Brett said

 

you can transfer funds to my paypal account and I will gladly spend your money for you.

 

I Was Thinking Some Marine Pistons .20 Over, A Bigger Cam And I Can Build My Twins And Do Something With My Cp3

 

if the truck is a daily drive i would avoid the fire rings what are you running now on it turbo sticks???

 

Welp, there went the $3500.

Do you have $3500 to spend all togather, or after the motor is finished?

Maybe a EGT gauge? and what Rusty said!

 

Dusty Adams how are you doing, guys give him a good bashing we all told him that all that timing and heat was going to get him one day and it did . Your true twin turbo's idea is out the door for sure way to much $, We know a light port job is in the works already thats $200, Stock Rebuild from what you told me today i think you said $150 per cylinder thats $900, New seals and gaskets $400, cam $680, Single mid size turbo $1500. That all adds up to $3280 plus the $400 you spent to get injectors checked out and they u know whated you on that deal , not sure if you are adding that in or not. O ya almost forgot new valve springs and valve job looking at $600 their. Maybe play around with some injectors or that pump idea you and wylie came up with. Either way cody is im sure not very happy with any of this . Get rid of that junky edge juice/attitude and just stick with the bullydog and mp-8 stack instead of all 3. No offiliation by the way just friends for all of you wondering . Dusty post of pictures of the pistons I have pics. of the head if you want I will post them up.

 

Ok, you can just cut me a check, that'll be fine!