genros

I want to add a fuel pressure guage to my truck. I am concerned with draing to much fuel with th hot juice. what do you all recomend and how to?

wheelndealn

Just get an Autometer electric FP gauge, tap the sensor into the fuel filter housing lid. Mechanical FP gauges suck, they always break, its worth your time and dollar for a good electric gauge.

I don't know a whole about the juice, but I wouldn't think its too much for the stock fuel system to handle.

staarma

I'll second the electrical gauge. Here are a few pics of what I did. It was a breeze to install as well.

This view shows the filter lid replacement from Geno's with the sender installed on the end of a 6" piece of rubber fuel line for dampening the vibration.


This view shows the gauge in the pod. I wired the gauge to the battery for power and to the back of the dimmer for the backlight and voila, done.

4x4not

Or you could do what I did and get a Commander with the FP kit. Of course I don't have mine yet! Go Quad Go!!

ptgarcia

That's what I did! I have the fuel pressure kit right here, but no Commander yet!