Fluxed & TNT'd
#17
DTR Advertiser
JP, I dont think you should have haze at idle with a F2. If the pistons are not cut and the head gasket is stock thickness I am thinking the head gasket could be letting go.
#18
Registered User
Thread Starter
Join Date: Dec 2006
Location: Fresno, Ca
Posts: 842
Likes: 0
Received 0 Likes
on
0 Posts
There was no haze whatsoever with the old injectors. Swapped in the new ones, started it up, and it hazed. It is a very very slight clear looking smoke. No coolant consumption, no fuel in oil. Are you thinking water is getting into the cylinders? The truck runs good otherwise.
Thread
Thread Starter
Forum
Replies
Last Post
CHIp07
3rd Gen High Performance and Accessories (5.9L Only)
3
01-19-2009 09:11 PM
wyocat
3rd Gen High Performance and Accessories (5.9L Only)
26
06-23-2008 01:39 PM
jmccart
3rd Gen High Performance and Accessories (5.9L Only)
1
06-20-2008 03:29 AM
TORQUE BEAST
3rd Gen High Performance and Accessories (5.9L Only)
13
05-09-2008 02:31 PM
molalla1ton
3rd Gen High Performance and Accessories (5.9L Only)
5
04-16-2008 01:08 PM