Electric Fuel Pressure gauge
Guest
Posts: n/a
Electric Fuel Pressure gauge
I'm just getting back to the US from Iraq and want to take care of a few unfinished details on my truck. Before I left there had been discussion that Isspro or Di Pricol (I don't remember which) was going to be coming out with an electric fuel pressure gauge. Did that ever happen? I don't see it listed in Geno's catalog. I was hoping for the white faced versions that match our stock gauges.
Registered User
Joined: Aug 2004
Posts: 3,697
Likes: 1
From: Houston, TX
I have a new Autometer Ultra-Lite Electric Fuel Pressure gauge(#4360) installed with my FASS. It is new, did not even see a listing on the Autometer website for it. Works great and matches my other Ultra-Lite gauges. It is on the expensive side, but wires only in the cab.
Registered User
Joined: Mar 2004
Posts: 1,271
Likes: 0
From: markham, ontario, canada
Originally Posted by RamWheelsBy4
I have a new Autometer Ultra-Lite Electric Fuel Pressure gauge(#4360) installed with my FASS. It is new, did not even see a listing on the Autometer website for it. Works great and matches my other Ultra-Lite gauges. It is on the expensive side, but wires only in the cab.
Registered User
Joined: Aug 2005
Posts: 396
Likes: 0
From: Calgary, Alberta
I have the lunar series, and I really like them. They match the stock dash well, and look nice.
I also want to get a fuel pressure gauge and a couple more in the overhead pod, and all electric. But they must be the lunar series. I also need to know where to mount the electric fuel pressure sensor.
What about water temp and oil pressure?
Thanks.
I also want to get a fuel pressure gauge and a couple more in the overhead pod, and all electric. But they must be the lunar series. I also need to know where to mount the electric fuel pressure sensor.
What about water temp and oil pressure?
Thanks.
Registered User
Joined: Aug 2004
Posts: 3,697
Likes: 1
From: Houston, TX
Originally Posted by nickleinonen
i have thought about that one, but the price scares me bigtime, so i think i will end up going mechanical with isolator [use my 0-35 boost as fuel when i relable it and get a 0-60 boost for when i eventually upgrade turbos]
No isolator to buy and install or worries about leaks either.
Trending Topics
Registered User
Joined: May 2003
Posts: 259
Likes: 0
From: Northern CA
I have the Westach white face gauge from Geno's and put it in the spot that the cig lighter was. Used a banjo bolt on the bottom of the fuel filter assembly so I can check post filter pressure. I think it looks good and you can check out my member's photo gallery.
Registered User
Joined: Aug 2004
Posts: 3,697
Likes: 1
From: Houston, TX
This is where my electric fuel pressure sending unit is installed. It is tapped into the new fuel line from the FASS to the injection pump. It is tapped in just before the firewall area, simplest place to tap in and route wires to the opening I have in the firewall for gauges/boxes.
Thread
Thread Starter
Forum
Replies
Last Post
nrussell
3rd Gen High Performance and Accessories (5.9L Only)
4
Jul 23, 2008 08:58 PM
streetsmoker
3rd Gen High Performance and Accessories (5.9L Only)
5
Feb 22, 2006 06:47 PM
rjm022
3rd Gen High Performance and Accessories (5.9L Only)
15
Feb 3, 2006 09:35 AM
kerry edwards
24 Valve Engine and Drivetrain
13
Apr 21, 2005 03:47 PM
doug
3rd Gen High Performance and Accessories (5.9L Only)
4
May 10, 2004 10:59 AM
