3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

Cold air intake... Which is all round best?

Thread Tools
 
Search this Thread
 
Old Jun 30, 2005 | 12:05 PM
  #1  
BigDodge1's Avatar
Thread Starter
Registered User
 
Joined: Feb 2005
Posts: 58
Likes: 0
From: Lone Star State
Question Cold air intake... Which is all round best?

I am considering putting out the couple hundred bucks for a cold air intake system. K&N has one, Green I believe has one, AirAid has one... and so on. They are generally the same price give or take, but is it really worth it? I want the increased hp but also want better gas milage. (I want my cake and to eat it too) Is there any difference in the brands on the performance end of the spectrum? Does anyone have one that has tickled them pink with the performance?

I put in an AirAid filter in prior to the cold air intakes being produced and I gained about .5 miles to the gallon increase. Should I expect the same or is it a wash.

I have straight piped the truck and put a 5" extention after the straight pipe. I gained some performance and a lot of noise. (not that I am complaining, by doing this and my neighbors can hear me pull out of my driveway at 4:30AM with my boat heading to the lake and it makes them all curse my name with jealousy.) Anyway, I digress, but would this change any factors in the delivery?

Thanks.
Reply
Old Jun 30, 2005 | 01:09 PM
  #2  
Mountainmac's Avatar
Registered User
 
Joined: Mar 2005
Posts: 39
Likes: 0
From: Florida
For me it is the Volant. I have used them extensively for the past several years and currently have one on the sposual unit's 2004 Nissan Titan and just ordered one for my CTD from http://www.lildevilmotorsports.com/p...oducts_id=4808

My 98 Durango had one along with the sposual unit's old Nissan Frontier. Never, ever had any problems with them and I like the fact they are fully enclosed so as not to pull in any hot air from the engine compartment. Very well made and fit is good.
Keep your foot out of it and it is pretty quiet. Smash the throttle and you hear your motor really come to life
Dyno results that I have found are anywhere from 2-18 hp depending on the vehicle.
Reply
Old Jun 30, 2005 | 02:54 PM
  #3  
dezeldog's Avatar
Registered User
 
Joined: Jul 2004
Posts: 506
Likes: 0
From: the mitten
BHAF all the way fleetguard 19037 $38-45 at local cummins dealer
Reply
Old Jun 30, 2005 | 02:58 PM
  #4  
cquestad's Avatar
Registered User
 
Joined: Dec 2003
Posts: 5,540
Likes: 0
From: Boise, Idaho
Maybe a Scotty Ram Air III? They are availible for a great price right here at the DTR Store.
Reply
Old Jun 30, 2005 | 04:06 PM
  #5  
slimpicken's Avatar
Registered User
 
Joined: Nov 2004
Posts: 346
Likes: 1
From: Nocona, Texas
if they ever get the revised version in. Been waiting for around a month for my scotty. Any body have anyword on the time frame??
Reply
Old Jun 30, 2005 | 04:47 PM
  #6  
cquestad's Avatar
Registered User
 
Joined: Dec 2003
Posts: 5,540
Likes: 0
From: Boise, Idaho
With a 04...you don't need a revised version. I believe the revised version is for the 4.5-05's?????

The hole into the fender is a different size.
Reply
Old Jun 30, 2005 | 05:42 PM
  #7  
Lary Ellis (Top)'s Avatar
Admin Team Leader
 
Joined: May 2002
Posts: 15,514
Likes: 207
No it is the new RA III's that we are waiting on they have been improved and definately worth waiting for the improved one's. Scotty say's we should have them ready to go by about the 15th of July, maybe sooner.
Reply
Old Jun 30, 2005 | 06:52 PM
  #8  
Car_nut57's Avatar
Registered User
 
Joined: Jan 2004
Posts: 446
Likes: 0
We have tried different units on the 04 in our shop and the Scotty RA3 performs the best with the lowest EGTs and the 2-stage foam filter does a great job stopping the dirt. We recommend the Scotty intakes and UNI filters.
Reply
Old Jun 30, 2005 | 08:15 PM
  #10  
runamuk's Avatar
Registered User
 
Joined: Jan 2005
Posts: 1,232
Likes: 1
From: Sacramento CA
I'll wait for the Scotty!

No others will do

Rick
Reply
Old Jun 30, 2005 | 08:15 PM
  #11  
4x4not's Avatar
Registered User
 
Joined: Apr 2005
Posts: 1,162
Likes: 0
From: Denver, CO
I'm going to mod my airbox for the time being, and then order a Scotty in a couple months... I've only heard good things about them
Reply
Old Jun 30, 2005 | 08:51 PM
  #12  
CETANE's Avatar
Registered User
 
Joined: May 2005
Posts: 69
Likes: 0
From: VA
BigDodge1:

Check my pics out for the Airaid w/ MIT. I have one on my rig and I am very pleased. The Airaid actually has 7 layers of filtration and has really opened up my truck (I have straight pipes as well). I drive aprox. 1000/week on the Interstate unloaded and I am getting 19.5 - 20.2 MPG hand caluclated (all depends on driving condions ie. wind, rain, or late for work...lol) I try to drive at 65 mph @ around 1900 RPMs as I just set the cruise control and move on up the country. I removed the silencer ring and I really like how these Cummins will whistle ... I have a 3.73 6 speed and I think that helps.

If you have any other questions about this set up or would like additional information about the Airaid w/ MIT feel free to PM me. Also, I received my total package for around $250 with a free cleaner kit. If you would like to know where I purchased it from just let me know. The sales people there are awesome and I will direct you to the guy that assisted me.

For example, they had a problem with my shpping address as I wanted the kit delivered in 2 days. So, they ate the cost and overnited it to me in order for me to get it on time. Great service. SHOUT OUT TO SONNIE!!!

Keep on truck'n yall!!!
Reply
Old Jun 30, 2005 | 09:12 PM
  #13  
Dieseljunkie's Avatar
Registered User
 
Joined: May 2004
Posts: 1,257
Likes: 0
From: Lake Arrowhead, Ca
Im waiting on the Scotty as well....
Scott
Reply
Old Jul 3, 2005 | 12:25 AM
  #14  
Jmac's Avatar
Chapter President
 
Joined: Mar 2004
Posts: 847
Likes: 0
From: North Central Florida
Come on Scotty, GO BABY GO!!!!!!!!!!!!!!!!!! We're waitn'
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Chip
3rd Gen High Performance and Accessories (5.9L Only)
7
Mar 30, 2013 12:39 PM
hamilton71801
Other
30
Sep 8, 2008 04:42 PM
herb
Other
4
Jul 18, 2008 08:25 AM
Dodgewincity
3rd Gen High Performance and Accessories (5.9L Only)
13
Jan 19, 2008 05:41 AM




All times are GMT -5. The time now is 09:59 PM.