Moking 24V

What is the best all around power modification for the 600 right now. I am getting the EZ because I just got the Banks Sucks Gun and it wasn't what I thought it was going to be.

Moking 24V

Nobody knows or what?

lit up

I have the TST and it works great. It builds way more power than the transmission can handle, so that is on the list as the next mod. I not familiar with the EZ, but I heard it works good just not as much power as the TST.

Fat Asp

MoKing 24V, Do you have gauges yet? What transmission do you have or upgrades. I would not go nuts and up the power yet and destroy your tranny or motor if you haven't done the necessary mods first. If you have done all that TST, Bully Dog, and Edge all have great boxes for you. OFF TOPIC lit up where did you purchase an 04 intercooler from.

tcr

Moking 24v, I would check your Banks Sucks Gun, I gave up my EZ for the banks on the 305/555 engine. The Banks I have is far superior compared to the EZ I had, maybe my EZ was screwed up? Who knows?

big red psd cc

My Six-Gun works great......the one my friend has......isn't worth 2.25 cents.

Taking it back to banks today to see what's up with it.

Moking 24V

Fat Asp, I have the SRT10 one gauge pillar with a Pyro in it. I know you need to upgrade tranny after 60hp or so. I had a 00 with Comp and injectors, 6" stacks. Two of my friends helped me install a Suncoast Lvl3 in it. I blew the headgasket at one pull. I told my neighbor this truck I have now I'm not building up like the other one. Wasted to much money and should have kept it but I screwed up, Oh well. My neighbor can have the power now when he gets his 04.5 Duramax.

lit up

Fat Asp,
I just got lucky when I blew mine and the dealer had a used 04 on the lot. We put the plastic replacement in the 04 and the aluminum one in mine. If you can get one I would do it, because anything over 38-40 and plastic one will blow.

Moking 24V

I heard plastic one is junk but also the 03-04 one isn't the greatest either.

rjordan

plastic what??

bigblock2stroke

plastic charge air cooler end caps.

One of the marvelous cost reductions that will end up costing more money for DC in warranty then they saved in the first place.

Moking 24V

How much power will the plastic intercooler handle until it breaks? I just got the juice minus attitude.