Aftermarket turbo questions
Registered User
Joined: Nov 2005
Posts: 317
Likes: 0
From: Cape Coral, FL
I saw it too...it worried me too.
Luken's SPS 66 is on the stock manifold and downpipe.....my SPS 6280 is on my stock down pipe, ATS manifold.
Don't ask me why
The best me and my DTT builder (also II distributor) can figure is that pre 04.5 trucks need the HX40 downpipe....since 03-04 trucks had smaller turbos maybe
Luken's SPS 66 is on the stock manifold and downpipe.....my SPS 6280 is on my stock down pipe, ATS manifold.
Don't ask me why
The best me and my DTT builder (also II distributor) can figure is that pre 04.5 trucks need the HX40 downpipe....since 03-04 trucks had smaller turbos maybe
It has been a while since I went down this road, and I just replaced everything all at once. I do recall the stock elbow before the downpipe being somewhat smaller and appreciably more restrictive than my setup. See photo............ I also know that HTT and possibly others can match your turbo to almost any stock type configuration.
This photo is of my Super B before the Killer B2(64) was installed.
Chris
Thread
Thread Starter
Forum
Replies
Last Post
holeshot440
12 Valve Engine and Drivetrain
4
Jun 21, 2013 10:40 AM
Ghost Ram
3rd Gen High Performance and Accessories (5.9L Only)
1
Jan 22, 2008 09:20 AM
Robert P
3rd Gen High Performance and Accessories (5.9L Only)
23
Mar 1, 2007 12:21 PM
gman07
1st Gen. Ram - All Topics
3
Apr 15, 2006 08:32 PM
I PASS GAS
Performance and Accessories 2nd gen only
7
Mar 16, 2006 07:59 AM