Is 4.5" backspacing good?
03-26-2008, 09:38 AM
#1
Chapter President
Thread Starter
Join Date: May 2006
Location: Kinnelon,NJ
Posts: 1,253
Likes: 0
Received 0 Likes
on
0 Posts
Is 4.5" backspacing good?
I have a dually and just put a long arm kit on and now i have rubbing issues. I found some cheap steel wheels that have 4.5" back spacing, is that enough to clear the arms without rubbing?
steve
steve
03-26-2008, 02:34 PM
#7
Registered User
Join Date: May 2005
Location: Kingsport, TN
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
I would think it would push the tire away from the control arms, and you should have enough lift in front not to rub the fenderwell in the rear of the front wheelwell. I'm running 4.52 in back spacing on a 17x9 with 35x12.5 and it doesn't get anywhere near my control arms. Tac
Thread
Thread Starter
Forum
Replies
Last Post
Redneck-Express
3rd Gen High Performance and Accessories (5.9L Only)
7
05-01-2009 12:45 PM
copperheadkid
3rd Gen High Performance and Accessories (5.9L Only)
22
03-07-2008 03:31 PM
PEAKSTRYDE
Suggestions, Comments and Site Questions
1
10-11-2007 04:20 PM
06CTDforAU
3rd Gen High Performance and Accessories (5.9L Only)
7
09-06-2007 07:41 AM
goldberg007
3rd Gen High Performance and Accessories (6.7L Only)
10
07-30-2007 04:33 PM