22.5" vs 3.42 swap vs new G56 swap
03-27-2008, 05:48 PM
#61
Registered User
Join Date: Feb 2008
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
3:42
Hi
Recently swapped to 3:42 (and Dynatrac hubs) from 3:73 and this put the rpms at 60mph at 1750 or so, in line with what I saw in my old 93 12v 3/4ton. Seems just right to me. Still has plenty of power, with stock engine, stock tire sizes.
This on a 2007 3500 SRW. Used AAM rear (11.5") and the GM front with spacer. Job done at Randy's Ring and Pinion.
Was concerned about durability with the overdrive.
Ian
Recently swapped to 3:42 (and Dynatrac hubs) from 3:73 and this put the rpms at 60mph at 1750 or so, in line with what I saw in my old 93 12v 3/4ton. Seems just right to me. Still has plenty of power, with stock engine, stock tire sizes.
This on a 2007 3500 SRW. Used AAM rear (11.5") and the GM front with spacer. Job done at Randy's Ring and Pinion.
Was concerned about durability with the overdrive.
Ian
Thread
Thread Starter
Forum
Replies
Last Post
roughstock
3rd Gen High Performance and Accessories (5.9L Only)
7
11-02-2013 01:48 PM
PEAKSTRYDE
Suggestions, Comments and Site Questions
1
10-11-2007 04:20 PM
VikingDiesel
3rd Gen High Performance and Accessories (5.9L Only)
47
05-11-2007 12:52 AM