Just a few questions!!
#1
Registered User
Thread Starter
Join Date: Mar 2006
Location: springville,utah
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Just a few questions!!
Just would like know if they are available yet in the megacab? Also are they only available in one ton? What does it mean when they say cab and chassis? Are they only available in the 68re or do they have a manual?
#2
Registered User
#5
Registered User
Join Date: Nov 2006
Location: Lincoln, NE
Posts: 541
Likes: 0
Received 0 Likes
on
0 Posts
#6
Chapter President
Join Date: Dec 2005
Location: Big Spring (now Stephenville), Tx
Posts: 1,741
Likes: 0
Received 0 Likes
on
0 Posts
Any 6.7s before Jan 2007 are Cab and Chassis (Regular HD Rams still had the 5.9), meaning there is no bed and I think the frame is build different (a little straighter I think), also giving different wheel base lengths, to the point of having one loooonng single cab. The manual G-56 was initally all that hit the lots for the first month, then the autos came out. The power for the C & Cs is 305hp and 610 ft. lbs
After Jan 2007 the 6.7 is the only diesel being put in the HD Rams, these are rated at 350hp and 650 ft.lbs with the auto and 325hp and ??? ft.lbs with the manual.
My question is, has it been proven that there is 2 different 6spd autos?
After Jan 2007 the 6.7 is the only diesel being put in the HD Rams, these are rated at 350hp and 650 ft.lbs with the auto and 325hp and ??? ft.lbs with the manual.
My question is, has it been proven that there is 2 different 6spd autos?
Thread
Thread Starter
Forum
Replies
Last Post
3500_CTD
3rd Gen High Performance and Accessories (5.9L Only)
13
01-29-2009 09:38 PM
Tuf-4x4
3rd Generation Ram - Non Drivetrain - All Years
4
11-19-2007 08:19 PM
GoodoleBob
3rd Generation Ram - Non Drivetrain - All Years
4
09-27-2006 11:37 PM