3rd Gen Engine and Drivetrain -> 2003-2007 5.9 liter Engine and drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

Used 1QT. oil in 3900 miles.

Old Nov 22, 2007 | 03:38 PM
  #1  
agalaczy's Avatar
Thread Starter
Registered User
 
Joined: Oct 2007
Posts: 130
Likes: 0
From: NORTHWEST VERMONT WHERE THE MEN ARE MEN AND THE SHEEP RUN SCARED.
Used 1QT. oil in 3900 miles.

My 07 5.9 CTD with 3900 miles on it is down 1 quart of engine oil since new.Is this O.K. or should I be concerned?
Reply
Old Nov 22, 2007 | 03:48 PM
  #2  
rjm022's Avatar
Registered User
 
Joined: Mar 2004
Posts: 1,803
Likes: 3
From: wilson,ny
since it has only 3900 miles on it- did you check it when you bought it?? was it full then??? if so, consuming 1qt of oil in such a small amount of time does not sound right. i go 20,000 miles between changes. my oil is alway right around the full mark on the dip stick.
Reply
Old Nov 22, 2007 | 03:58 PM
  #3  
dieselkan's Avatar
Registered User
 
Joined: May 2007
Posts: 28
Likes: 0
If the truck is not sitting on level ground or you check the oil too soon after shutting it down it will read low. Also these engines need to be worked hard to be broken in properly. Pulling a trailer is best. Mine was using about a quart in 5000 miles until I took it on a long trip with the 5th wheel RV. I worked it hard on the hills. Oil consumption is much improved.
Reply
Old Nov 22, 2007 | 04:14 PM
  #4  
agalaczy's Avatar
Thread Starter
Registered User
 
Joined: Oct 2007
Posts: 130
Likes: 0
From: NORTHWEST VERMONT WHERE THE MEN ARE MEN AND THE SHEEP RUN SCARED.
Thanks for the quick replies.I check oil level in my garage every couple of days.Most of my driving is highway (about 85 miles daily) at 60-65 mph.Only towed trailer once for about 240 miles.Maybe piston rings need to seat more?
Reply
Old Nov 22, 2007 | 04:27 PM
  #5  
Fiftygrit's Avatar
Registered User
 
Joined: Oct 2005
Posts: 759
Likes: 1
From: Northern BC Canada
Mine used a bit when breaking in, now I can tow for 5000 km and not use a drop, I have over 31,000 km now, and tow lots, I change oil (synthetic) every 10,000 and dont use any,
Reply
Old Nov 22, 2007 | 04:35 PM
  #6  
HOHN's Avatar
Registered User
 
Joined: Apr 2003
Posts: 6,564
Likes: 6
From: Cummins Technical Center, IN
Let the engine break in.

The CTD has a reputation for losing oil when new.

You'll see oil consumption drop off to almost nothing as the engine breaks in. The best thing you can do to speed that along is USE the truck and USE IT HARD. Find a heavy trailer, practice your ditch recovery techniques on willing friends, etc. Warm it, load it up and let it get cozy with the loud pedal.

If it still consumes oil with a "scientific" check of the oil level after about 12K miles, then you may have something to address-- likely a leak.

Justin
Reply
Old Nov 22, 2007 | 04:48 PM
  #7  
Hounddog's Avatar
Registered User
 
Joined: Mar 2004
Posts: 4,463
Likes: 0
From: Ila georgia
If it hasn't been charnged its time to on a first oil change.
Reply
Old Nov 22, 2007 | 05:41 PM
  #8  
HOHN's Avatar
Registered User
 
Joined: Apr 2003
Posts: 6,564
Likes: 6
From: Cummins Technical Center, IN
I agree. I did my first change at 500 miles.
Reply
Old Nov 22, 2007 | 06:31 PM
  #9  
nelrod's Avatar
Registered User
 
Joined: May 2006
Posts: 1,055
Likes: 0
From: foothills of North Carolina
Don't worry my friend, break it in good and you should have a great
ctd engine. That being said, it is not uncommon for any diesel to use oil. That's why on M.Benz diesels, on fuel door, it says check oil every time. I think the other guys are right, your rings have not seated yet.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
yellowhemi
4th Gen Ram -Non Drivetrain- 2010 and Up
7
Mar 30, 2011 06:30 PM
hitcb1789
3rd Gen Engine and Drivetrain -> 2003-2007
4
May 25, 2010 09:10 AM
Buckshotmckee
General Diesel Discussion
37
Mar 12, 2006 09:32 AM
fitzydog
3rd Gen Engine and Drivetrain -> 2003-2007
10
Jul 7, 2005 08:39 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:43 AM.