3rd Gen Engine and Drivetrain -> 2003-2007 5.9 liter Engine and drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

Should you feel tranny downshift into 1st with shift kit?

Old Feb 2, 2009 | 01:57 PM
  #1  
sallyman1's Avatar
Thread Starter
Registered User
 
Joined: Nov 2007
Posts: 2,028
Likes: 0
From: Alberta Canada
Should you feel tranny downshift into 1st with shift kit?

As you all know I recently got a shift kit/torque upgrade to my truck. i got a triple disc goerend converter and shift kit and valve body upgrade. all is good and no more slip. but what i do notice more now is obviously more agressive shifting but i also notice i can feel the tranny downshifting into 1st gear when i approach a red light. is this normal? i couldnt feel tranny shift into 1st before ths overhaul.i
Reply
Old Feb 2, 2009 | 01:58 PM
  #2  
klx650a2's Avatar
Registered User
 
Joined: Oct 2007
Posts: 1,801
Likes: 1
From: Saskaberia, SK
I've ridden in some cars that had built tranny's and yes you could feel them downshift.
Reply
Old Feb 2, 2009 | 01:59 PM
  #3  
Spooler's Avatar
Registered User
 
Joined: Jan 2006
Posts: 5,902
Likes: 5
From: Claxton, GA
Yeap, normal.... Nice to feel it shift gears for a change isin't it.
Reply
Old Feb 2, 2009 | 02:22 PM
  #4  
sallyman1's Avatar
Thread Starter
Registered User
 
Joined: Nov 2007
Posts: 2,028
Likes: 0
From: Alberta Canada
yes. so its normal?
Reply
Old Feb 4, 2009 | 01:33 PM
  #5  
sallyman1's Avatar
Thread Starter
Registered User
 
Joined: Nov 2007
Posts: 2,028
Likes: 0
From: Alberta Canada
so its perfectly normal to feel the tranny downshift into 1st when you slow down? kinda like a shutter when creeping to a hault.
Reply
Old Feb 4, 2009 | 01:54 PM
  #6  
cbrahs's Avatar
Chapter President
 
Joined: Apr 2007
Posts: 9,375
Likes: 7
From: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
you just did a shift kit, valve body and converter, you can't expect it to shift like stock. so yes this is normal
Reply
Old Feb 6, 2009 | 07:09 AM
  #7  
kaptain101's Avatar
Registered User
 
Joined: Oct 2007
Posts: 7
Likes: 0
From: Southern NJ
On my '05 after installing a shift kit the downshift to first was very noticeable, in fact a clunk. What cured it was reseting the transmission throttle valve actuator. Anytime the valve body is removed the TVA should be reset. This sets the zero position for the throttle valve. Just turn the key to the run position for one minute, do not press on accellerator. This gives the TVA time to reset.
Reply

Trending Topics

Old Feb 6, 2009 | 09:10 AM
  #8  
gmctd's Avatar
Registered User
 
Joined: Jan 2006
Posts: 1,163
Likes: 0
From: texas
Correct, as the shift kit also raises line pressures, thus the harsh forced shift into low
Reply
Old Feb 6, 2009 | 09:39 AM
  #9  
cincydiesel's Avatar
Muted one day, Banned the next....... Ah the life of a DTR 1%'er
 
Joined: Jan 2005
Posts: 2,187
Likes: 0
From: Ohio: Home of the disappointing sports teams
Those built trannys take a little getting used to. Mines a whole different animal now.


Sallyman, I noticed in some of your other post that you are using your tow haul with the new vb and tc upgrade. Is so you might want to check with Dave at Goerends on that because he recommended that I dont use it.
Reply
Old Feb 6, 2009 | 10:39 AM
  #10  
Spooler's Avatar
Registered User
 
Joined: Jan 2006
Posts: 5,902
Likes: 5
From: Claxton, GA
He has an 04.5. It dosen't have a tow/haul mode. Only the overdrive lock out which will lock up the TC in 3rd when pressed.
Reply
Old Feb 6, 2009 | 11:12 AM
  #11  
cincydiesel's Avatar
Muted one day, Banned the next....... Ah the life of a DTR 1%'er
 
Joined: Jan 2005
Posts: 2,187
Likes: 0
From: Ohio: Home of the disappointing sports teams
Originally Posted by Spooler
He has an 04.5. It dosen't have a tow/haul mode. Only the overdrive lock out which will lock up the TC in 3rd when pressed.
Sorry, I just seen in some of his other post he was calling it his Tow /Haul button. (The thread about vibration at 1800 rpms)
Reply
Old Feb 6, 2009 | 01:08 PM
  #12  
sallyman1's Avatar
Thread Starter
Registered User
 
Joined: Nov 2007
Posts: 2,028
Likes: 0
From: Alberta Canada
lol whatever. same stuff anywyas. thats what tow/haul does, it drps a gear and locks tc.
Reply
Old Feb 6, 2009 | 06:44 PM
  #13  
04DEEZELRAM's Avatar
Registered User
 
Joined: Mar 2007
Posts: 472
Likes: 0
From: Mobile,AL
My HTS transmisson does that, it scared me the first time i drove it
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
APD
12 Valve Engine and Drivetrain
1
Jul 19, 2015 08:45 AM
Rammer64
24 Valve Engine and Drivetrain
8
May 22, 2013 12:10 PM
pred
1st Gen. Ram - All Topics
7
Jan 28, 2008 08:38 PM
expressfish
3rd Gen Engine and Drivetrain -> 2003-2007
9
Sep 28, 2006 09:13 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 02:22 AM.