3rd Gen Engine and Drivetrain -> 2003-2007 5.9 liter Engine and drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

Cruse control problem

Old Jun 19, 2011 | 01:53 PM
  #1  
jpajax's Avatar
Thread Starter
Registered User
 
Joined: Sep 2006
Posts: 226
Likes: 0
From: Foothills of the Blueridge Mt. of N.C.
Cruse control problem

Well I guess I spoke to soon that had no problem. It just started that when I try to turn the cruse on the light on dash will come on then suddenly go off and cruse control doesn't work. Any suggestion on what to check?
Reply
Old Jun 19, 2011 | 04:01 PM
  #2  
Spooler's Avatar
Registered User
 
Joined: Jan 2006
Posts: 5,902
Likes: 5
From: Claxton, GA
Vaccum lines from the vaccum pump by the passenger side battery. The line will run to the dashpot under the drivers side battery. If you have had a leak for a while you may have burned up your pump.
Reply
Old Jun 19, 2011 | 04:03 PM
  #3  
brightrevenue's Avatar
Registered User
 
Joined: Nov 2006
Posts: 8
Likes: 0
From: Vancouver, BC
I would have the PCM checked out. My PCM has a problem & I'm waiting for a new one. It's only been 9 months, but Chrysler doesn't really care. The other thing you may want to check is the speedometer connection.
Reply
Old Jun 19, 2011 | 06:52 PM
  #4  
jpajax's Avatar
Thread Starter
Registered User
 
Joined: Sep 2006
Posts: 226
Likes: 0
From: Foothills of the Blueridge Mt. of N.C.
Pump working ok pulled the line off and it came on plug it up built up vacuum went off. Could not find a fuse marked cruse control but I guess if the light comes on would the fuse be bad. Is there a wire that goes to the back of speedometer?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
oldblues
2nd Gen. Dodge Ram - No Drivetrain
4
Aug 4, 2007 11:17 PM
Evertight
24 Valve Engine and Drivetrain
7
Feb 19, 2007 11:57 PM
alborada
1st Gen. Ram - All Topics
4
Jul 22, 2006 12:20 AM
xyzer
3rd Gen Engine and Drivetrain -> 2003-2007
12
Apr 23, 2005 01:06 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:05 PM.