Hi all
I've been pulling out my hair trying to get the long line in that goes from the drivers side of the trans that attaches to the left engine mount and ends with a rubber end to the front cooler at the rad.
I have tried spinning it and rolling it in every way
I have also removed the front drive shaft, the steering shaft under the hood, and the air intake horn.
this line is expensive and brand new and I don't want to kink it and end up buying a second one!!

What am I missing??

What is the trick with this??

 

Update:
parts are in. Needed to remove entire fuel filter housing and it almost fell into place with the previous parts out of the way already.