No more "Beep"
#1
Registered User
Thread Starter
Join Date: Oct 2003
Location: Kelowna, B.C. Canada
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
No more "Beep"
Ever since I disconnected my batteries to do some work on the truck, I no longer get a "Beep" from the horn when I set my Alarm on my '99.
Can anyone tell me how I can get it back??
Sometimes It doesn't set when I'm walking away from the Truck and I cann't tell if the Alarm set or if it didn't without the Horn sound.
Thanks in advance.
Can anyone tell me how I can get it back??
Sometimes It doesn't set when I'm walking away from the Truck and I cann't tell if the Alarm set or if it didn't without the Horn sound.
Thanks in advance.
#3
Registered User
Join Date: Mar 2006
Location: Acushnet, MA
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Automatic Door Locks at 15mph (on/off)
1. close all doors
2. place key in ignition and cycle from off to on postition 4 times leaving it in the ON postition (do not start)
3. Press the drivers side door lock to LOCK to lock the doors within 30 seconds.
4.You'll hear a single confirmation chime when programming is complete.
5. repeat to toggle this feature.
Remote Keyless unlock all doors on first press:
1. Same as 1 & 2 above.
2. Press drivers door lock switch to UNLOCK the doors then to LOCK within 30 seconds.
3. You'll hear a single confirmation chime when programming is completed.
Horn Chirp ON/OFF:
1. Same as 1 & 2 above.
2. Press and hold the UNLOCK button on the REMOTE for 4-10 seconds.
3. Press the LCK button on the REMOTE and then release BOTH button.
4. You'll hear a single confirmation chime whe programming is complete.
1. close all doors
2. place key in ignition and cycle from off to on postition 4 times leaving it in the ON postition (do not start)
3. Press the drivers side door lock to LOCK to lock the doors within 30 seconds.
4.You'll hear a single confirmation chime when programming is complete.
5. repeat to toggle this feature.
Remote Keyless unlock all doors on first press:
1. Same as 1 & 2 above.
2. Press drivers door lock switch to UNLOCK the doors then to LOCK within 30 seconds.
3. You'll hear a single confirmation chime when programming is completed.
Horn Chirp ON/OFF:
1. Same as 1 & 2 above.
2. Press and hold the UNLOCK button on the REMOTE for 4-10 seconds.
3. Press the LCK button on the REMOTE and then release BOTH button.
4. You'll hear a single confirmation chime whe programming is complete.
Thread
Thread Starter
Forum
Replies
Last Post
bdo
3rd Generation Ram - Non Drivetrain - All Years
9
03-28-2015 09:59 PM
dodgebob03
3rd Gen Engine and Drivetrain -> 2003-2007
9
05-21-2014 07:43 PM
exwrestler
3rd Generation Ram - Non Drivetrain - All Years
2
12-24-2013 09:22 PM
Clane
3rd Generation Ram - Non Drivetrain - All Years
5
09-06-2009 09:18 PM