Well, it's time to replace the dash on the 99, we got the new VP44 in, new cam sensor, the new Holley Blue lift pump and the rear speed sensor (had to break off baked on clay that would be good for pottery class.)

Is there a procedure or do I just start prying on the dash panels & air bag cover to get at it? I got a replacement dash panel from the dealer (it helps to be related to TUGUM here on the board and his dealer connections), going to paint it with MOPAR paint tomorrow night and want to start putting it on.

Diesel Dan's video on the VP44 was such a help on the VP that i was wondering if anyone has a write up to follow?

Thanks again, Brian

 

there is a thread about it floating around might try searching for it. not sure on the vid.

 

https://www.dieseltruckresource.com/...d.php?t=106921

https://www.dieseltruckresource.com/...d.php?t=131523

https://www.dieseltruckresource.com/...ad.php?t=79469

https://www.dieseltruckresource.com/...d.php?t=153367

All kinds of info in these links, from evap. replace to ??????
Hope this is what you're looking for in one of these.