2nd Gen. Dodge Ram - No Drivetrain Discussion for all Dodge Rams from 1994 through 2002. Please, no engine or drivetrain discussion.

Clutch Question

Thread Tools
 
Search this Thread
 
Old Apr 3, 2006 | 06:32 PM
  #1  
Rick_Orcutt's Avatar
Thread Starter
Registered User
 
Joined: Apr 2005
Posts: 48
Likes: 0
From: Colorado Springs, CO
Clutch Question

Please bear with me if this has been asked before. I could not find the answer anywhere.

I have a 98 2WD 5 speed. I pull a 5th wheel occasionally. It seems lately that when I am unloaded and get on it like after slowing down a little, the engine winds up a little bit faster than the pickup gets going. My question is, does this sound like my clutch is going out, and if so, how can I test it to be sure? Any advice is greatly appreciated.

Thanks!
Reply
Old Apr 3, 2006 | 06:39 PM
  #2  
RickCJ's Avatar
Registered User
 
Joined: Dec 2002
Posts: 1,170
Likes: 0
From: Hollidaysburg PA
Originally Posted by Rick_Orcutt
Please bear with me if this has been asked before. I could not find the answer anywhere.

I have a 98 2WD 5 speed. I pull a 5th wheel occasionally. It seems lately that when I am unloaded and get on it like after slowing down a little, the engine winds up a little bit faster than the pickup gets going. My question is, does this sound like my clutch is going out, and if so, how can I test it to be sure? Any advice is greatly appreciated.

Thanks!
Sounds like the clutch could be slipping. To try it, put it in 5th and lug it down to about 40 mph and then floor it and see if it slips or holds.
Reply
Old Apr 3, 2006 | 06:59 PM
  #3  
Rick_Orcutt's Avatar
Thread Starter
Registered User
 
Joined: Apr 2005
Posts: 48
Likes: 0
From: Colorado Springs, CO
That's how it feels, like it is slipping. Am I correct in assuming that means a new clutch in the near future, or is there some way to adjust it?
Reply
Old Apr 4, 2006 | 10:14 AM
  #4  
Lil Dog's Avatar
Chapter President
 
Joined: Feb 2002
Posts: 6,102
Likes: 2
From: Red Deer, Alberta Canada
New clutch time. Too much slipping and you could do some damage to the flywheel, but if you go with SBC products, it comes in the package.
Reply
Old Apr 4, 2006 | 07:50 PM
  #5  
Rick_Orcutt's Avatar
Thread Starter
Registered User
 
Joined: Apr 2005
Posts: 48
Likes: 0
From: Colorado Springs, CO
Thanks. Best place to buy is Napa I guess? Any other suggestions? Also, which clutch is best for my pickup?
Reply
Old Apr 7, 2006 | 04:23 AM
  #6  
P.O.R.'s Avatar
Registered User
 
Joined: Dec 2003
Posts: 421
Likes: 0
From: u.p. michigan
south bend clutch is my choice and you should upgrade to a clutch that will hold your power with the chip.here is a link.

http://www.southbendclutch.com/dynamax.html
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WACTD
3rd Gen Engine and Drivetrain -> 2003-2007
7
Jul 25, 2006 11:41 AM
Fishbait
24 Valve Engine and Drivetrain
10
Jun 6, 2006 12:34 PM
mbmrang
12 Valve Engine and Drivetrain
8
Jan 21, 2006 12:49 PM
kwhite4
Performance and Accessories 2nd gen only
2
May 9, 2005 03:22 PM




All times are GMT -5. The time now is 02:46 AM.