Added Rear Fenderliners to My 2002
Thread Starter
Registered User
Joined: Sep 2004
Posts: 1,489
Likes: 0
From: God's Country (Castle Rock, Co)
He guys and gals if anyone is interested I tracked down the rear fenderliner pt # 55346010 if any body is interested in adding them to there 01.5-02 2nd gen. They cost $ 35.00 a piece. The pt # is for both L & R. They really turned out nice and they dress up the truck. The holes are already pre-drilled in the bed so they just fastened into place. I did not purchase the factory plastic body clips/push pins, $3.00 ea.? I went down and purchased 1/4 carriage bolts, stainless, and installed. You'll need 7 bolts per side, $10.00 @ the hardware store in bolts, flat & lock washers, & nuts. I can post pics later if anyone is interested.
Tye

Tye
OHHH now that I think about it, where did you find the part number at?? I need to get a new liner for the passenger front on my truck but I can't seem to find a stupid part number or price for one. If you could give me a link or anything would help!!
Thanks Tye
~Nick
Thanks Tye
~Nick
Thread Starter
Registered User
Joined: Sep 2004
Posts: 1,489
Likes: 0
From: God's Country (Castle Rock, Co)
I'm real happy with them! I have the FASS under the drivers fender and the air compressor & air tank under the passenger fender so they keep the pumps clean and dirt/grimme free. I've also noticed that I can't hear the FASS pump anymore.
I got the Pt #s from my buddy @ the dealership, he did all the leg work.
Tye
I got the Pt #s from my buddy @ the dealership, he did all the leg work.
Tye
Originally Posted by Buckshotmckee
He guys and gals if anyone is interested I tracked down the rear fenderliner pt # 55346010 if any body is interested in adding them to there 01.5-02 2nd gen. They cost $ 35.00 a piece. The pt # is for both L & R. They really turned out nice and they dress up the truck. The holes are already pre-drilled in the bed so they just fastened into place. I did not purchase the factory plastic body clips/push pins, $3.00 ea.? I went down and purchased 1/4 carriage bolts, stainless, and installed. You'll need 7 bolts per side, $10.00 @ the hardware store in bolts, flat & lock washers, & nuts. I can post pics later if anyone is interested.
Tye
Tye
Trending Topics
Looks Sharp! They came stock on my rig, but I tell yuo what, they are a ***** to get clean when washing your truck. A friend of mine told me to use Wesleys Bleech White on the fenderwells; I have yet to try it but he said it eorks like a charm on his!
Thread
Thread Starter
Forum
Replies
Last Post
BB KoncepZ
3rd Generation Ram - Non Drivetrain - All Years
3
Jun 24, 2011 04:54 PM
Buckshotmckee
3rd Generation Ram - Non Drivetrain - All Years
27
Feb 21, 2007 06:58 AM
BEHRMAN
3rd Gen Engine and Drivetrain -> 2003-2007
12
Mar 29, 2005 01:43 AM



