2000 Dodge 2500 No Brake Pedal
Thread Starter
Registered User
Joined: Jun 2015
Posts: 2
Likes: 0
2000 Dodge 2500 No Brake Pedal
2000 2500 5.9 cummins 4x4. Replaced front calipers, bled system multiple times, good fluid flow with no air bubbles, as soon as I start the truck the pedal pushes to the floor, pulses twice and ABS & brake light comes on....HELP!
Registered User
Joined: Nov 2002
Posts: 4,053
Likes: 29
From: lyman, utah
did you bleed the system with the engine running?
Registered User
Joined: May 2006
Posts: 5,614
Likes: 167
From: Pacific NW, B'ham, Kalispell MT
Hydroboost needs to be running to bleed...
If the pedal goes straight to the floor, there is no brake fluid on the ground under the truck and your hoses aren't swelling you still have air in there.
If the pedal goes straight to the floor, there is no brake fluid on the ground under the truck and your hoses aren't swelling you still have air in there.
Registered User
Joined: Jul 2005
Posts: 665
Likes: 7
From: VA Beach
Also this is a dumb question but are you sure you put the calipers in right?
Right on right side, left on left?
The bleed valves have to be on top or you will never get the air out.
You would be suprised how many "pros" make that mistake.
Right on right side, left on left?
The bleed valves have to be on top or you will never get the air out.
You would be suprised how many "pros" make that mistake.
Thread
Thread Starter
Forum
Replies
Last Post
jim2000
24 Valve Engine and Drivetrain
2
Oct 21, 2008 08:05 PM
joebishop23
2nd Gen. Dodge Ram - No Drivetrain
9
Oct 29, 2007 10:19 AM
shrmpboatcptn
2nd Gen. Dodge Ram - No Drivetrain
7
Jan 22, 2007 11:33 PM
